Navigation
Back up to About Overview
[+] Expand All
[-] Collapse All
Download This Guide
Known Issues
This section lists the known issues in hardware and software in Junos OS Release 15.1X49-D80 for Sky ATP.
- After you change the revocation configuration of a CA profile, the change cannot be populated to the SSL-I's revocation check. We recommend you change the SSL-I configuration to enable or disable CRL checking instead of using a ca-profile configuration. [PR 1143462]
- When in HA mode, if you disable and then reenable CRL checking of certificate validity, the system does not reenable CRL checking. You must reboot the SRX1500 Services Gateway before CRL checking is again enabled. [PR 1144280]
- If you select the Permit action in the Configure > Email Management > SMTP window, e-mails with attachments are sent directly to the recipients while the attachments are sent to the cloud for analysis. If system constraints, such as memory issues, cloud connectivity issues, etc., occur while the attachment is sent to the cloud, the fallback condition is supposed to be used. However, in this case, the Permit action overrides the fallback action. For example, if your fallback condition is Block, the Permit action as configured in the Web GUI is used. [PR 1239650]
- A file submission timeout can occur on the SRX Series
device when the following conditions are present:
- The advanced anti-malware service (AAMW) is enabled.
- SMTP or SMTPS is configured in the AAMW policy.
- The fallback action is permit.
- Long network latency exists between the SRX Series device and the Sky ATP cloud service.
Under these circumstances, the e-mail remains in the sender’s Outlook outbox and the recipient never receives the e-mail.
As a workaround, try to resolve the long latency issue between the SRX Series device and the Sky ATP cloud service. If this is not possible, increase the server timeout setting in the recipient’s Outlook.
