Contents
Contents
Contents
Create an Adaptive Threat Profiling Feed
Use this page to add a new adaptive threat profiling feed.
Before You Begin
Review the Adaptive Threat Profiling Overview topic.
Procedure
To add a new adaptive threat profiling feed:
- Select Configure > Adaptive Threat Profiling.
The Adaptive Threat Profiling page appears.
- Click the plus sign (+).
The Add New Feed page appears as shown in Figure 19.
Figure 19: Add New Feed Settings
- Complete the configuration according to the guidelines provided in the Table 25.
- Click OK to save the changes.
Table 25: Add New Feed Settings
Setting | Guideline |
|---|---|
Feed Name | Enter a unique name for the threat feed. The feed name must begin with an alpha-numeric character and can include letters, numbers, and underscores; no spaces are allowed. The length is 8–63 characters. |
Type | Select the content type of the feed. Note: Currently, this feature only supports IP addresses. |
Time to Live | Enter the number of days for the required feed entry to be active. After the feed entry crosses the time to live (TTL) value, the feed entry is automatically removed. The available range is 1–365 days. |
Add to Infected Hosts | (Optional) Enable this setting to add the contents (for example, source or destination IP address) from this feed to the Infected host feed. |
Note
You can create a maximum of 64 feeds.
You can add all 64 feeds to infected host feeds.
After you create a feed, the same feed will be available for configuration on the Junos CLI.
Related Documentation
Feedback Received. Thank You!
Related Topics