Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Sky ATP with SDSN (Without Guided Setup) Overview

    This is an outline of the tasks required to configure Sky ATP with SDSN.

    Note: If you prefer to use quick setup, which automatically takes you through the steps listed below, it is located under Configure>Guided Setup >Sky ATP with PE.

    • A Sky ATP license and account are needed for all threat prevention types (Sky ATP with PE, Sky ATP, and Cloud Feeds only). If you do not have a Sky ATP license, contact your local sales office or Juniper Networks partner to place an order for a Sky ATP premium or basic license. If you do not have a Sky ATP account, when you configure Sky ATP, you are redirected to the Sky ATP server to create one. Please obtain a license before you try to create a Sky ATP account. Refer to Installing Policy Enforcer for instructions on obtaining a Sky ATP license.
    • Before you configure Policy Enforcer, you must enter the IP address and login credentials for the policy enforcer virtual machine. Go to Administration > Policy Enforcer > Settings. Once this information is entered, you can begin the setup process. See Policy Enforcer Settings. (Refer to Installing Policy Enforcer for instructions on downloading Policy Enforcer and creating your policy enforcer virtual machine.)
    1. Create one or more Sky ATP realms and enroll SRX Series devices in the appropriate realm. (Enroll devices by clicking Add Devices in the list view once the realm is created.)

      In the UI, navigate to Configure>Threat Prevention>Sky ATP Realms. Click the + icon to add a new Sky ATP realm.

      See Creating Sky ATP Realms and Enrolling Devices or Associating Sites for details.

    2. Create sites and add devices to those sites.

      In the UI, navigate to Devices >Secure Fabric. Click the + icon to create a new site.

      See Creating Secure Fabric and Sites for details.

    3. Create a policy enforcement group.

      In the UI, navigate to Configure>Shared Objects>Policy Enforcement Groups. Click the + icon to create a new policy enforcement group.

      See Creating Policy Enforcement Groups for details.

    4. Add the threat prevention policy, including profiles for one or more threat types: C&C server, infected host, malware.

      In the UI, navigate to Configure> Threat Prevention > Policies. Click the + icon to create a new threat prevention policy.

      See Creating Threat Prevention Policies for details.

    Modified: 2017-07-11