Option: Limiting the Number of MAC Addresses Learned on a VPLS Interface
There are three main levels where you can configure MAC address limits:
interface-mac-limit—This statement allows you to specify a limit for MAC addresses at an interface level. For VPLS, you can include theinterface-mac-limitstatement at the [edit logical-systems logical-system-namerouting-instances routing-instance-nameprotocols vpls], [edit logical-systems logical-system-namerouting-instances routing-instance-name protocols vpls site site-name interfaces interface-name], [edit routing-instances routing-instance-name protocols vpls], or [edit routing-instances routing-instance-name protocols vpls site site-name interfaces interface-name] hierarchy level. For MX Series routers only, you can specify what the router does with additional MAC addresses once the MAC address limit is reached. The default behavior is for the router to flood the packet, but you can alternatively include thepacket-action dropoption to have the router drop the packets. The default MAC address table size for each interface is 1024 addresses.mac-table-size—This statement allows you to specify a limit for MAC addresses at a domain level. For VPLS, you can include themac-table-sizestatement at the [edit logical-systems logical-system-name routing-instances routing-instance-name protocols vpls] or [edit routing-instances routing-instance-name protocols vpls] hierarchy level. The default MAC address table size for each domain is 5120 addresses.global-mac-limit(MX Series routers only)—This statement allows you to specify a limit for MAC addresses for all interfaces and all domains for the entire router. You can include theglobal-mac-limitstatement at the [edit protocols l2-learning] hierarchy level. The default MAC address table size for the entire system is 393,215 addresses. Note that the value ofglobal-mac-limitmust be set lower than the configured value ofinterface-mac-limit.
If you manually configure a MAC address limit, you must
ensure that values for interface limits (such as the interface-mac-limit) are set lower than domain limits (such as mac-table-size), and the domain limits are set lower than global limitss (such
as global-mac-limit). If a value for a more specific limit
is set higher than a more global limit, the commit operation fails.
The range of values for the interface-mac-limit statement is 16 through 65,536. The output of the show vpls
statistics command displays the results of configuring interface-level
MAC address limitations.
[edit]
routing-instances {
instance-name {
protocols {
vpls {
interface-mac-limit number;
site site-name {
interface interface-name {
interface-mac-limit number;
}
}
}
}
}
}