Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Link Management Protocol Peers

 

After you set up traffic engineering links, configure LMP network peers with the peer peer-name statement at the [edit protocols link-management] hierarchy level. A peer is the network device with which your routing platform communicates and establishes an FA-LSP. Designate a peer name, configure the peer router ID as the address (often a loopback address), and apply the traffic engineering link to be associated with this peer. Remember to configure both sides of a peering relationship to enable bidirectional communication.

Unlike GMPLS, you must not configure a control channel for a peer. If you include a control channel, the commit operation fails.