Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Example: Configuring MBGP MVPN Senders and Receivers using PIM SM and RSVP-TE Provider Tunnels

 

This section contains a configuration example and commands you can issue to verify multiprotocol BGP multicast VPN sender and receiver site routers.

In the example shown in Figure 1, there are three routers: PE1, the CE router, and PE2. Each router supports a specific role as a sender, receiver, or sender and receiver. This example does not represent a complete network.

Figure 1: Multiprotocol BGP Multicast VPN Senders and Receivers
 Multiprotocol BGP Multicast VPN Senders
and Receivers

Router PE1 is configured as a multicast sender and receiver site in VPN A, and as a multicast receiver site in VPN B. The relevant configuration for Router PE1 follows.

Router PE1

Router PE2 is configured as a multicast sender-only site. The relevant configuration for Router PE2 follows.

Router PE2

Verifying Your Work

To verify correct operation of multiprotocol BGP multicast VPNs, use the following commands:

  • show mvpn c-multicast

  • show mvpn instance

  • show mvpn neighbor

The following sections show the output of these commands used with the configuration example:

show mvpn c-multicast

Router> show mvpn c-multicast
Router> show mvpn c-multicast extensive
Router> show mvpn c-multicast summary

show mvpn instance

Router> show mvpn instance
Router> show mvpn instance extensive
Router> show mvpn instance
Router> show mvpn instance summary
Router> show mvpn instance VPN-A
Router> show mvpn instance VPN-A extensive
Router> show mvpn instance VPN-A summary

show mvpn neighbor

Router> show mvpn neighbor
Router> show mvpn neighbor extensive

The following is output for a p2mp configuration.

Router> show mvpn neighbor