Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Connecting the VSE Platform to the Router

    To log in to the system command line interface (CLI) for the first time, you need the IP address assigned to the interface.

    To connect the router running Junos OS and the VSE platform:

    1. Choose any one of the VSE platform interfaces as the management interface. Make sure there is a physical connection from this interface to the router.
    2. (Optional, but required for remote power cycling) Connect the console port on the left side of the VSE platform to a console, see Connecting a Console Server to VSE1100 and VSE2100 Devices.
    3. Configure the TFTP server and the DHCP server for PXE boot.

      BIOS is enabled for PXE boot at the time of manufacture for all VSE platform interfaces. For how to enable a PXE boot of the VSE platform, see “Configuring the DHCP Server and TFTP Server for Compute Nodes” in the JunosV App Engine Administration Guide.

    Published: 2013-03-12