Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Connecting Power to AC-Powered VSE1100 and VSE2100 Devices

    The power supply in a Virtual Services Engine is located on the rear panel.

    Ensure that you have a power cord appropriate for your geographical location.

    Ensure that you have connected the device chassis to earth ground.

    Caution: To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, you must connect the devices to earth ground before you connect them to power. The device gets additional grounding when you plug the power supply in the device into a grounded AC power outlet by using the AC power cord appropriate for your geographical location (see AC Power Cord Specifications for VSE1100 and VSE2100 Devices).

    To connect AC power to the device:

    1. Locate the power cord shipped with the device; the cords have plugs appropriate for your geographical location. See AC Power Cord Specifications for VSE1100 and VSE2100 Devices.

      Warning: Ensure that the power cord does not drape where people can trip on it or block access to VSE components.

    2. Insert the coupler end of the power cord into the AC power cord inlet on the rear panel.
    3. If the AC power source outlet has a power switch, set it to the off (0) position.
    4. Insert the power cord plug into an AC power source outlet.
    5. If the AC power source outlet has a power switch, set it to the on (|) position.

    Published: 2013-03-12