TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

AC Power Cord Specifications for VSE1100 and VSE2100 Devices

Detachable AC power cords are supplied with AC-powered devices. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Caution: The AC power cord for the devices is intended for use with that device only and not for any other use.

Power Cable Warning (Japanese)
Warning: The attached power cable is only for this product. Do not use the cable for another product.

Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the device are in compliance.

Table 1 lists AC power cord specifications provided for each country or region.

Table 1: AC Power Cord Specifications for Virtual Services Engines

Country/Region	Electrical Specifications	Plug Standards
Australia	250 VAC, 10 A, 50 Hz	AS/NZ 3112
China	250 VAC, 10 A, 50 Hz	GB2099 and GB1002
Europe (except Italy, Switzerland, and United Kingdom)	250 VAC, 10 A, 50 Hz	CEE (7) VII
Italy	250 VAC, 10 A, 50 Hz	CEI 23-16
Japan	125 VAC, 12 A, 50 or 60 Hz	JIS C8303
North America	125 VAC, 13 A, 60 Hz	NEMA 5-15
Switzerland	250 VAC, 10 A, 50 Hz	SEV 1011 SEV 6534/2
United Kingdom	250 VAC, 10 A, 50 Hz	BS 1363/A

TechLibrary

Related Documentation

AC Power Cord Specifications for VSE1100 and VSE2100 Devices

Related Documentation

Published: 2013-03-12