ON THIS PAGE
Connect SSR130 to External Devices
Connect SSR130 to a Management Console
SSR130 has a console port (
an RJ-45 connector. Use the console port to connect the appliance
to a management console or to a console server.
Ensure that you have an RJ-45 to DB-9 rollover cable available. An RJ-45 cable with an RJ-45 to DB-9 adapter is provided with the appliance.
If your laptop or PC does not have a DB-9 pin contact and you want to connect your laptop or PC directly to the SSR130, use a combination of the RJ-45 cable and RJ-45 to DB-9 adapter supplied with the appliance and a USB to DB-9 plug adapter. You must provide the USB to DB-9 plug adapter.
- Connect one end of the Ethernet cable to the console port
- Connect the other end of the Ethernet cable into the console server (see Figure 1) or management console (see Figure 2).