SRX320 Services Gateway Chassis Overview
The SRX320 Services Gateway chassis measures 1.73 in. high, 11.81 in. wide, and 7.52 in. deep. The PoE model weighs 3.4 lb. and the non-PoE model weighs 3.28 lb.
Before removing or installing components of a functioning services gateway, attach an electrostatic discharge (ESD) strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to the device.
The services gateway must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the services gateway to ground.
SRX320 Services Gateway Front Panel
Figure 1 shows the front panel of the SRX320 Services Gateway.
Table 1 provides details about the front panel components.
Table 1: SRX320 Services Gateway Front Panel Components
Reset Config button
Returns the services gateway to the rescue configuration or the factory-default configuration.
Two slots for Mini-PIMs. Mini-PIMs can be used to provide LAN and WAN functionality along with connectivity to various media types.
1-GbE small form-factor pluggable (SFP) ports
Two 1-GbE MACsec-capable ports for network traffic.
1-GbE RJ-45 ports
Six LAN ports (0/0 to 0/5)
The ports have the following characteristics:
The ports can be used to:
The services gateway has one USB port that accepts a USB storage device.
Indicate component and system status at a glance.
Use the Power button to power on or power off the services gateway.
Figure 2 shows the LEDs on the front panel.
Table 2 lists the front panel LEDs.
Table 2: SRX320 Services Gateway Front Panel LEDs
mPIM0 and mPIM1
Network Port LEDs
The SFP and Ethernet ports have two status LEDs, LINK and ACT, located above the port.
Table 3: Network Port LEDs
LINK (LED on the left)
ACT (LED on the right)
SRX320 Services Gateway Back Panel
Table 4: SRX320 Services Gateway Back Panel Components
Provides the capability to lock and secure the device at the installation site.
Keeps all the services gateway components within the acceptable temperature range.
Cable tie holder
Secures the DC power cord connection to the adapter.
Power supply input (DC power input)
Connects the services gateway to the external power supply.
Connects the services gateway chassis to earth ground (optional).
Note: We recommend connecting the services gateway to ground if required.
SRX320 Services Gateway Interface Modules Overview
Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable network interface cards (NICs) supported on the SRX300 line of services gateways. You can easily insert or remove Mini-PIMs from the front slots of the services gateway chassis. The Mini-PIMs provide physical connections to a LAN or a WAN. The Mini-PIMs receive incoming packets from the network and transmit outgoing packets to the network. During this process, they perform framing and line-speed signaling for the medium type.
The Mini-PIMs are not hot-swappable. You must power off the services gateway before removing or installing Mini-PIMs.
The following Mini-PIMs are supported on the SRX320 Services Gateway:
1-Port Serial Mini-Physical Interface Module (SRX-MP-1SERIAL-R)
1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R)
1-Port VDSL2 (Annex A) Mini-Physical Interface Module (SRX-MP-1VDSL2-R)
LTE Mini-Physical Interface Module (SRX-MP-LTE-AE and SRX-MP-LTE-AA)
Wi-Fi Mini-Physical Interface Module (SRX-MP-WLAN-US, SRX-MP-WLAN-IL, and SRX-MP-WLAN-WW)
For more information on the Mini-PIMs, see the SRX300 Series and SRX550 High Memory Gateway Interface Modules Reference.