Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Alarm Messages

 

The following sections contain PTX10008 and PTX10016 alarms information.

Understanding Alarms

The PTX10000 Series and OCX Series support different alarm types and severity levels. Table 1 provides a list of alarm terms and definitions that may help you in monitoring the device.

Table 1: Alarm Terms and Definitions

Term

Definition

Alarm

Signal alerting you to conditions that might prevent normal operation. On the device, alarm indicators might include the LCD panel and LEDs on the device. The LCD panel (if present on the device) displays the chassis alarm message count. Blinking amber LEDs indicate yellow alarm conditions for chassis components.

Alarm condition

Failure event that triggers an alarm.

Alarm severity levels

Seriousness of the alarm. The level of severity can be either major (red) or minor (yellow).

  • Major (red)—Indicates a critical situation on the device that has resulted from one of the following conditions. A red alarm condition requires immediate action.

    • One or more hardware components have failed.

    • One or more hardware components have exceeded temperature thresholds.

    • An alarm condition configured on an interface has triggered a critical warning.

  • Minor (yellow or amber)—Indicates a noncritical condition on the device that, if left unchecked, might cause an interruption in service or degradation in performance. A yellow alarm condition requires monitoring or maintenance. For example, a missing rescue configuration generates a yellow system alarm.

Alarm types

Alarms include the following types:

  • Chassis alarm—Predefined alarm triggered by a physical condition on the device such as a power supply failure or excessive component temperature.

  • Interface alarm—Alarm you configure to alert you when an interface link is down. Applies to ethernet, fibre-channel, and management-ethernet interfaces. You can configure a red (major) or yellow (minor) alarm for the link-down condition, or have the condition ignored.

  • System alarm—Predefined alarm that might be triggered by a missing rescue configuration, failure to install a license for a licensed software feature, or high disk usage.

Interface Alarm Messages

Interface alarms are alarms that you configure to alert you when an interface is down.

To configure an interface link-down condition to trigger a red or yellow alarm, or to configure the link-down condition to be ignored, use the alarm statement at the [edit chassis] hierarchy level. You can specify the ethernet, fibre-channel, or management-ethernet interface type.

By default, major alarms are configured for interface link-down conditions on the control plane and management network interfaces in a QFabric system. The link-down alarms indicate that connectivity to the control plane network is down. You can configure these alarms to be ignored using the alarm statement at the [edit chassis] hierarchy level.