Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

PTX10004 Chassis

 

The PTX10004 chassis houses the hardware components. The chassis components include the fan trays, fan tray controllers, power supplies, Routing and Control Boards (RCBs), line cards, an optional cable management system, and the status panel.

PTX10004 Chassis Physical Specifications

The PTX10004 modular chassis is a rigid sheet-metal structure that houses the other router components. You can mount up to six PTX10004 routers in a standard 19-in. 4-post rack (42 U) provided the rack can handle the combined weight and there is adequate power and cooling. See Figure 1 to help identify the major components and see Table 1 for the physical specifications of the chassis of these components.

Figure 1: Front View of the PTX10004
Front View of the
PTX10004
  1
RCBs
  3
Handles
  2
Status panel
  4
Line cards
Warning

The handles on each side of the chassis facilitate the fine-tune positioning of the chassis on the base brackets. Do not use the handles to lift the chassis, even when the chassis is empty. See Mount a PTX10004 in a Four-Post Rack Using a Mechanical Lift or Manually Mount a PTX10004 in a Four-Post Rack for instructions on properly moving a loaded chassis.

Table 1: PTX10004 Router Physical Specifications

Description

Weight

Height

Width

Depth

Chassis, spare

110 lb (50 kg)

173 lb (78 kg) with pallet

12.2 in. (33 cm)

17.4 in. (44.2 cm)

Note: The outer edges of the chassis flange extend the width to 19 in. (48.3 cm).

35 in. (88.9 cm) chassis only

42.4 in. (107.7 cm) with EMI door

Chassis PTX10004-BASE3 AC or DC configuration

240 lb (109 kg)

303 lb (137 kg) with pallet

12.2 in. (33 cm)

17.4 in. (44.2 cm)

Note: The outer edges of the chassis flange extend the width to 19 in. (48.3 cm).

35 in. (88.9 cm) with JNP10K-PWR-AC2 power supplies

42.4 in. (107.7 cm) with EMI door

Chassis PTX10004-PREM2 AC or DC configuration

260 lb (117 kg)

323 lb (147 kg) with pallet

12.2 in. (33 cm)

17.4 in. (44.2 cm)

Note: The outer edges of the chassis flange extend the width to 19 in. (48.3 cm).

35 in. (88.9 cm) with JNP10K-PWR-DC2 power supplies

42.4 in. (107.7 cm) with EMI door

Chassis redundant PTX10004-PREM3 AC or DC configuration

272  lb (123 kg)

335 lb (152 kg) with pallet

12.2 in. (33 cm)

17.4 in. (44.2 cm)

Note: The outer edges of the chassis flange extend the width to 19 in. (48.3 cm).

35 in. (88.9 cm) with JNP10K-PWR-AC2 power supplies

42.4 in. (107.7 cm)) with EMI door

JNP10K-LC1201 line card

31 lb (14.06 kg)

12.2 in. (33 cm)

17.2 in. (43.7 cm)

21.3 in. (54.1 cm)

PTX10K-LC1202-36MR

21 lb (9.5 kg)

1.9 in. (4.8 cm)

17.2 in. (43.68 cm)

21.3 in. (54.1 cm)

PTX10004 Field-Replaceable Units

Field-replaceable units (FRUs) are router components that you can replace at your site. The router uses the following types of FRUs:

  • Hot-insertable and hot-removable—You can remove and replace these components without powering off the router or disrupting the routing function.

  • Hot-pluggable—You can remove and replace these components without powering off the router, but the routing function is interrupted until you replace the component.

Table 2 lists the FRUs and their types for the PTX10004 routers.

Table 2: FRUs in a PTX10004

FRU

Type

Power supplies

Hot-insertable and hot-removable.

Fan trays

Hot-insertable and hot-removable.

Fan tray controllers

Hot-insertable and hot-removable.

Routing and Control Boards (RCBs)

Redundant configuration:

  • Primary RCB is hot-pluggable.

  • Backup RCB is hot-insertable and hot-removable.

Base configuration:

  • Removal of the RCB causes the router to shut down. To prevent traffic disruption, take the chassis offline. If a temporary disruption is acceptable, you can install a replacement RCB in the second slot. The system restarts to elect a primary RCB and a backup RCBs If necessary, you can manually switch the primary and backup RCB using the request chassis routing-engine master switch command.

Switch Interface Boards (SIBs)

SIBs are hot-insertable and hot-removable. We recommend that you take SIBs offline before removing them to avoid traffic loss while the router fabric is being reconfigured. Use the following command:

user@router> request chassis sib slot slot-number offline

Line cards

Hot-insertable. We recommend that you take line cards offline before removing them. Use the following command:

user@router> request chassis fpc-slot slot-number offline

Optical transceivers

See PTX10004 Optical Transceiver and Cable Support for how to find detailed specifications and the Junos OS release in which the transceivers were introduced.

Hot-insertable and hot-removable.

Note

Line cards are not part of the base or redundant configuration. You must order them separately.

Note

If you have a Juniper Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/. Failure to do so can result in significant delays if you need replacement parts. This note does not apply if you replace an existing component with the same type of component.

PTX10004 Status Panel

The PTX10004 status panel shows the overall status of the chassis.

PTX10004 chassis ship with an enhanced power bus to future-proof the chassis for potential power growth.

The status panel indicates the chassis status through a set of five bicolor LEDs. It has an Azure blue stripe along the left side of the LEDs. See Figure 2 for a chassis status panel.

Figure 2: Status Panel on the Chassis
Status Panel
on the Chassis

Table 3 describes the status panel LEDs.

Table 3: Status Panel LEDs on a PTX10004

Name

Color

State

Description

! Minor alarm (Triangle warning symbol)

Yellow

Off

No minor alarms are active.

On steadily

A minor alarm is active.

Alarm (Bell symbol)

Yellow

Off

No minor alarms are active.

On steadily

A minor alarm is active.

Red

Off

No major alarms are active.

On steadily

A major alarm is active.

! Major alarm (Circle warning symbol)

Red

Off

No major alarms are active.

On steadily

A major alarm is active.

POWER SUPPLIES

Green

On steadily

All of the power supplies are online and operating normally.

Yellow

Blinking

One or more of the power supplies has an error.

None

Off

None of the power supplies is receiving power.

FANS

Green

On steadily

The fans and the fan tray controllers are online and operating normally.

Yellow

Blinking

There is an error in a fan or in one of the fan tray controllers.

None

Off

The fan tray controllers and fan trays are not receiving power.

SIBS

Green

On steadily

At least one installed Switch Interface Board (SIB) is online.

Yellow

Blinking

There is a hardware error in one or more SIBs.

None

Off

All the SIBs are offline.

LINE CARDS

Green

On steadily

At least one installed line card is online.

Yellow

Blinking

There is a hardware error in one or more line cards.

None

Off

All the line cards are offline.

CONTROL BOARDS

Green

On steadily

All installed Routing and Control Boards (RCBs) are online.

Yellow

Blinking

One or more RCBs have an error condition.

None

Off

The installed RCBs are offline.

PTX10004 Optional Equipment

The PTX10004 routers offers a cable management system (JLC-CBL-MGMT-KIT) and an electrostatic discharge (ESD) front door with an air filter (JNP10004-FPNL1) a as optional equipment. An ESD front door (JNP10004-FRNT-PNL) without an air filter comes standard with each configuration.