Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

PTX10003 Management Panel

 

The PTX10003-8T management panel is in the upper right corner of the port panel (see Figure 1).

Figure 1: PTX10003-8T Port Panel and Management Panel
PTX10003-8T Port Panel and Management
Panel
  1
Management panel
  2
Port panel

PTX10003 Management Panel Components

You manage the PTX10003 by using the Junos OS Evolved software CLI, which is accessible through the console and out-of-band management ports on the management panel. The management panel, located in the upper right corner of the port panel, has system status LEDs that alert you to minor and major alarms, and other issues with the router. It also has external clock synchronization ports and a USB port to support software installation and recovery. Figure 2 shows the management panel in detail.

Figure 2: PTX10003 Management Panel Components
PTX10003 Management Panel Components
  1
RJ-45 Ethernet management port(MGMT)
  6
Beacon LED
  2
Power (PWR) Status (STA) and alarm LEDs (MJR= major alert; MNR=minor alert)
  7
Four LANE STATUS LEDs numbered 0, 1, 2, 3 for lane identification of the QSFP channel. The lane ID LEDs work in conjunction with the activity LEDs that appear beneath the optics. These optics can support up to four independent lanes. Since there is only one LED per QSFP, the lane ID LEDs indicate which physical QSFP lane corresponds to the LED indicator that is currently active.
  3
RJ-45 console UART (CON) port. An optional GPS Time of Day (TOD) is also supported.
  8
Four co-axial input/output (IN/OUT SMB connectors for external 1PPS and 5MHz/10MHz simultaneous I/O bi-directional timing. BITS is not supported.
  4
SFP (MGMT) port for 1G system management
  9
USB 2.0 port for connection to the CPU
  5
SFP (PTP) port for an IEEE 1588 PTP timing source
10
Reset (RESET) push button for resetting the CPU

PTX10003 Management Panel LEDs

Table 1 describes the management panel LEDs on the PTX10003.

Table 1: PTX10003 Management Panel LEDs

LED Name

Color/State

Definition

RJ-45 10/100/1000 Management Port LED MGMT

Off

Link up, no activity

Yellow/Blinking

Link up, activity

Power LEDs PWR

Green/On

Power is ok

Yellow/Blinking

Power fault

Off

Offline

SFP Optic Management Port LED MGMT

Green

Link up, no activity

Green/Blinking

Link up, activity

Off

Link down

PTP Port LED PTP

Green

Link up, no activity

Green/Blinking

Link, activity

Off

Link down

Alarm

MJR

Red/On

Alarm is active

Off

No alarm

Alarm LEDs

MNR

Yellow/On

Alarm is active

Off

No alarm

Beacon (B)

Blue/off

Used as chassis locator

LANE STATUS

Green/off, 2x2 LED matrix

Indicates which lane of optics corresponds to LED traffic indicator beneath optics. Upper left corner LED corresponds to lane 0, proceeding clock wise – lane 1,2,3

For power and temperature alarms, use the show chassis environment fpc operational mode command to get detailed information on the internal state of the chassis. For example:

user@device> show chassis environment fpc