Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

PTX10003 Regulatory Standard Compliances

 

PTX10003 Agency Approvals

The PTX10003 complies with the following standards:

  • Safety

    • CAN/CSA-C22.2 No. 60950-1, Safety of Information Technology Equipment

    • UL 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements

    • EN 60950-1: 2006/ A2: 2013- Safety of Information Technology Equipment

    • IEC 60950-1: 2005/ A2: 2013- Information Technology Equipment - Safety - Part 1: General Requirements (with country deviations)

    • EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements and User's Guide

  • EMC

    • EN 300 386 V1.6.1 (2012-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electro Magnetic Compatibility (EMC) requirements

    • EN 300 386 V2.1.1 (2016-07) Telecommunication network equipment; Electro Magnetic Compatibility (EMC) requirements; Harmonized Standard covering the essential requirements of the Directive 2014/30/EU

    • EN 55032:2015 (CISPR 32:2015) Electromagnetic compatibility of multimedia equipment - Emission requirements

    • EN 55024:2010 (CISPR 24:2010) Information technology equipment - Immunity characteristics - Limits and methods of measurement

    • EN 55035:2017 (CISPR 35:2016) Electromagnetic compatibility of multimedia equipment - Immunity requirements

    • IEC/EN 61000 Immunity Test

    • AS/NZS CISPR 32:2015 Australia/New Zealand Radiated and Conducted Emissions

    • FCC 47 CFR Part 15 USA Radiated and Conducted Emissions

    • IC ICES-003 Canada Radiated and Conducted Emissions

    • VCCI-CISPR 32:2016 Japanese Radiated and Conducted Emissions

    • BSMI CNS 13438 Taiwan Radiated and Conducted Emissions (at 10 Meter)

    • KN 32 and KN 35 Korea Radiated Emission and Immunity Characteristics (at 10 Meter)

    • KN 61000 Korea Immunity Test

    • IEC/EN 61000 Immunity Test

    • TEC/SD/DD/EMC-221/05/OCT-16 (Supersedes No. TEC/EMI/TEL-001/01/FEB-09) India EMC standard

    • Juniper Inductive GND (JIG)

  • NEBS (Level 3)

    • GR-1089-CORE, Issue 6: EMC and Electrical Safety—Generic Criteria for Network Telecommunications Equipment

      • The equipment is suitable for installation as part of the Common Bonding Network (CBN).

      • The battery return connection is to be treated as an Isolated DC return (DC-I), as defined in GR-1089-CORE.

      • GR-63-CORE: NEBS, Physical Protection

    • Acoustic Noise

      Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70dB(A) oder weniger gemäss EN ISO 7779

      Translation:

      The emitted sound pressure is below 70 dB(A) per EN ISO 7779.

  • Immunity

    • EN-61000-3-3 Voltage Fluctuations and Flicker

    • EN-61000-4-2 ESD

    • EN-61000-4-3 Radiated Immunity

    • EN-61000-4-4 EFT

    • EN-61000-4-5 Surge

    • EN-61000-4-6 Low Frequency Common Immunity

  • Acoustic Noise

    Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70dB(A) oder weniger gemäss EN ISO 7779

    Translation:

    The emitted sound pressure is below 70 dB(A) per EN ISO 7779.

Compliance Statements for the PTX10003 Routers

This topic describes the compliance statements for the PTX10003 routers.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Industry Canada does not guarantee the equipment will operate to the users’ satisfaction.

Before installing this equipment, users should ensure that it is permissible to connect the equipment to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Caution

Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

European Community

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Israel



Translation from Hebrew–Warning: This product is Class A. In residential environments, the product may cause radio interference, and in such a situation, the user may be required to take adequate measures.

Japan

The preceding translates as follows:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

VCCI-A

Korea

The preceding translates as follows:

This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller or user should take notice of it, and this equipment is to be used in the places except for home.

Taiwan

The preceding translates as follows:

This is Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

United States

The QFX Series device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.