Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Maintaining the NFX350 SSD

 

Removing an SSD from an NFX350 Series Device

You need to power off the NFX350 Series device to remove an SSD from the device.

Ensure that you have the following equipment available:

  • Electrostatic discharge (ESD) grounding strap

  • An antistatic bag or an antistatic mat

  • SSD to replace

To remove an SSD, see (Figure 1):

  1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Place the antistatic bag or the antistatic mat on a flat, stable surface.
  3. Place your thumb on the SSD handle and press the tab below the SSD handle with one finger to unlock the SSD from its slot.
  4. Pull the SSD firmly to slide it out of its slot.
  5. Place the SSD in the antistatic bag or on the antistatic mat placed on a flat, stable surface.
Figure 1: Removing an SSD
Removing an SSD

Installing an SSD in an NFX350 Series Device

You need to power off the NFX350 Series device to install an SSD into the device.

Ensure that you have the following equipment available:

  • ESD grounding strap

To install an SSD, see (Figure 2):

  1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  2. Hold the SSD by its handle and slide it gently into its slot until the tab below the handle locks into the SSD slot.
Figure 2: Installing the SSD
Installing the SSD