Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

EX9208 System Overview

 

EX9208 Switch Hardware Overview

Juniper Networks EX9208 Ethernet Switches provide high performance, scalable connectivity, and carrier-class reliability for high-density environments such as campus-aggregation and data-center networks. The EX9208 switch has a throughput of up to 4.8 terabits per second (Tbps) or up to 240 gigabits per second (Gbps) per slot full duplex. The EX9208 switch is a modular system that provides high availability and redundancy for all major hardware components, including Routing Engine modules (RE modules), Switch Fabric modules (SF modules), fan tray (redundant fans), and power supplies.

You can manage EX9208 switches by using the same interfaces that you use for managing other devices running the Juniper Networks Junos operating system (Junos OS)—the CLI, the Network and Security Manager (NSM), and Junos Space.

Benefits

Simplified network architecture—EX9208 switches deliver a simple, secure, virtualized network environment that increases business agility. They are ideal for simplifying campus, data center, and combined campus and data center network environments by collapsing network layers. In a multichassis link aggregation (MC-LAG) configuration in the campus, you can use EX9208 switches to eliminate Spanning Tree Protocol (STP); they collapse the core and aggregation layers, thereby simplifying the network architecture and network operations. In a data center, you can use EX9208 switches to collapse core and aggregation layers. In combined campus and data center environments, EX9208 switches consolidate network layers to simplify the network architecture and operations.

MACsec support—EX9200-40F-M and EX9200-40XS line cards and EX9200-20F-MIC for EX9200-MPC line card supports IEEE 802.1ae MACsec with AES-256 bit encryption, ensuring link-layer data confidentiality, data integrity, and data origin authentication.

Software

Juniper Networks EX Series Ethernet Switches run Junos OS, which provides Layer 2 and Layer 3 switching, routing, and security services.

Chassis Physical Specifications

The EX9208 switch is eight rack units (8 U) in size. Five EX9208 switches can fit in a standard 48 U rack. Each EX9208 switch is designed to optimize rack space and cabling. See Figure 1, Figure 2, and Figure 3.

Figure 1: Front View of an EX9208 Switch
Front View of an EX9208
Switch
Figure 2: Rear View of an EX9208 Switch with AC Power Supplies
Rear View of an EX9208 Switch
with AC Power Supplies
Figure 3: Rear View of an EX9208 Switch with DC Power Supplies
Rear View of an EX9208 Switch
with DC Power Supplies

Host Subsystem

Switching and routing functionality, system management, and system control functions of an EX9208 switch are performed by the host subsystem. The host subsystem consists of a Routing Engine functioning together with a Switch Fabric.

You can install either one or two host subsystems in the slots labeled 0 and 1 in the front panel of the chassis. A base-configuration EX9208 switch has one host subsystem. A redundant-configuration EX9208 switch has a second host subsystem. For more information, see EX9208 Switch Configurations.



Line Cards

The EX9208 switch has six horizontal line card slots and supports line rate for each line card. The line cards in EX9208 switches combine a Packet Forwarding Engine and Ethernet interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that you can install in the line card slots—labeled 0 through 5—on the front of the switch chassis. All line cards are hot-removable and hot-insertable. Table 1 lists the line cards available for EX9208 switches.

Table 1: Line Cards Available for EX9208 Switches

Model

Description

Additional Information

EX9200-2C-8XS

A line card with two 100-Gigabit Ethernet ports and eight 10-Gigabit Ethernet ports

EX9200-2C-8XS Line Card

EX9200-4QS

A line card with four 40-Gigabit Ethernet ports

EX9200-4QS Line Card

EX9200-6QS

A line card with six 40-Gigabit Ethernet ports and 24 10-Gigabit Ethernet ports

EX9200-6QS Line Card

EX9200-MPC

A modular line card that accepts any of the following MICs:

  • EX9200-10XS-MIC

  • EX9200-20F-MIC

  • EX9200-40T-MIC

EX9200-MPC Line Card

EX9200-12QS

A line card with six 40-Gigabit Ethernet rate-selectable ports, each of which can house transceivers

EX9200-12QS Line Card

EX9200-32XS

A line card with 32 10-Gigabit Ethernet ports

EX9200-32XS Line Card

EX9200-40T

A line card with 40 10/100/1000BASE-T ports that support RJ-45 connectors

EX9200-40T Line Card

EX9200-40F

A line card with 40 1-Gigabit Ethernet ports

EX9200-40F Line Card

EX9200-40F-M

A line card with 40 1-Gigabit Ethernet ports with Media Access Control Security (MACsec) capability

EX9200-40F-M Line Card

EX9200-40XS

A line card with 40 10-Gigabit Ethernet ports with Media Access Control Security (MACsec) capability, each of which can house 10-gigabit small form-factor pluggable plus (SFP+) transceivers

EX9200-40XS Line Card

Cooling System

The cooling system in an EX9208 switch is a field-replaceable unit (FRU). It consists of a hot-removable and hot-insertable fan tray. The fan tray contains six fans. The fan tray installs vertically on the right back of the chassis and provides side-to-side chassis cooling. See Cooling System and Airflow in an EX9208 Switch.



Power Supplies

Power supplies for the EX9208 switch are fully redundant, load-sharing, and hot-removable and hot-insertable FRUs. Each EX9208 switch chassis can hold up to four AC or DC power supplies.

Table 2 shows the details of the power supplies available for EX9208 switches.

Table 2: Power Supplies Supported on EX9208 Switches

Power Supply

Input Voltage

Output Power

2520 W AC

Low-voltage line (100–120 VAC)

1167 W

High-voltage line (200–240 VAC)

2050 W

2400 W DC

–40 VDC through –70 VDC

2400 W to 2600 W

A base-configuration EX9208 switch ships with three low-line (100–120 VAC) or two high-line (200–240 VAC) AC power supplies. An AC-powered, redundant-configuration EX9208 switch ships with four low-line (100–120 VAC) or four high-line (200–240 VAC) AC power supplies. See AC Power Supply in an EX9208 Switch.

A DC-powered, redundant-configuration EX9208 switch ships with four DC power supplies. See DC Power Supply in an EX9208 Switch.

Caution

Do not mix AC and DC power supplies in the same chassis.

EX9208 Switch Configurations

Table 3 lists the hardware configurations for an EX9208 switch—base (AC) and redundant (AC and DC versions)—and the components included in each configuration.

Table 3: EX9208 Switch Hardware Configurations

Switch Configuration

Configuration Components

First Junos OS Release

EX9208-BASE3B-AC

(base configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • One EX9200-SF2 module

  • One EX9200-RE2 module

  • One fan tray

  • Three 2520 W AC power supplies

  • Blank panels for the line card slots

  • Blank panel for the empty power supply slot

17.1R1

EX9208-RED3B-DC

(redundant configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF2 modules

  • Two EX9200-RE2 modules

  • One fan tray

  • Four 2520 W DC power supplies

  • Blank panels for line card slots

17.1R1

EX9208-RED3B-AC

(redundant configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF2 modules

  • Two EX9200-RE2 modules

  • One fan tray

  • Four 2520 W AC power supplies

  • Blank panels for line card slots

17.1R1

EX9208-BASE3A-AC

(base configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • One EX9200-SF2 module

  • One EX9200-RE module

  • One fan tray

  • One air filter kit

  • Three 2520 W AC power supplies

  • One EX9200-SF module cover panel

  • Six line card cover panels

  • Blank panels for empty power supply slots

14.1

EX9208-REDUND3A-AC

(redundant configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF2 modules

  • Two EX9200-RE modules

  • One fan tray

  • One air filter kit

  • Four 2520 W AC power supplies

  • Six line card cover panels

14.1

EX9208-REDUND3A-DC

(redundant configuration with 2400 W DC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF2 modules

  • Two EX9200-RE modules

  • One fan tray

  • One air filter kit

  • Four 2400 W DC power supplies

  • Six line card cover panels

14.1

EX9208-BASE-AC

(base configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • One EX9200-SF module

  • One EX9200-RE module

  • One fan tray

  • One air filter kit

  • Three 2520 W AC power supplies

  • One EX9200-SF module cover panel

  • Six line card cover panels

  • Blank panels for empty power supply slots

12.3R2

EX9208-REDUND-AC

(redundant configuration with 2520 W AC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF modules

  • Two EX9200-RE modules

  • One fan tray

  • One air filter kit

  • Four 2520 W AC power supplies

  • Six line card cover panels

12.3R2

EX9208-REDUND-DC

(redundant configuration with 2400 W DC power supplies)

  • Chassis with craft interface and midplane

  • Two EX9200-SF modules

  • Two EX9200-RE modules

  • One fan tray

  • One air filter kit

  • Four 2400 W DC power supplies

  • Six line card cover panels

12.3R2

Note

You can install up to six line cards (in any combination) in the switch.

Note

Line cards are not part of the base or redundant configuration. You must order them separately.

Note

Power cords and additional power supplies (AC or DC) must be purchased separately.

EX9208 Switch Hardware and CLI Terminology Mapping

This topic describes the hardware terms used in EX9208 switch documentation and the corresponding terms used in the Junos OS CLI. See Table 4.

Table 4: CLI Equivalents of Terms Used in Documentation for EX9208 Switches

Hardware Item (CLI)

Description (CLI)

Value (CLI)

Item in Documentation

Additional Information

Chassis

EX9208

Switch chassis

Chassis Physical Specifications of an EX9208 Switch

Midplane

One of the following:

  • EX9208-BP

  • EX9208-BP3

Switch midplane

Midplane in an EX9200 Switch

FPM Board

Front Panel Display

Craft Interface

Craft Interface in an EX9200 Switch

PEM (n)

One of the following:

  • PS 1.4-2.52 kW; 90-264 V AC in

  • DC 2.4 kW Power Entry Module

n is a value in the range 0-3. The value corresponds to the power supply slot number.

AC or DC power supply

Routing Engine (n)

One of the following:

  • RE–S–EX9200

    –1800X4

  • RE–S–EX9200

    –2X00x6

n is a value in the range 0-1.

In a base configuration, only one entry appears.

In a redundant configuration, two entries appear–one for each Routing Engine module (RE module) installed in the chassis.

RE module

Routing Engine Module in an EX9200 Switch

CB (n)

One of the following:

  • EX9200–SCBE

  • EX9200–SF2

n is a value in the range 0-1.

Multiple line items appear in the CLI if more than one Switch Fabric modules (SF modules) is installed in the chassis.

CB0 and CB1 stand for SF modules.

SF module

Switch Fabric Module in an EX9200 Switch

FPC (n)

Abbreviated name of the line card.

One of the following:

  • EX9200-2C-8XS

  • EX9200 4x40G QSFP

  • EX9200 24x10GE+6x40GE

  • EX9200-MPC

  • EX9200-12QS

  • EX9200 32x10G SFP

  • EX9200 40x1G Copper

  • EX9200-40x1G-SFP

  • EX9200-40FE

  • EX9200-40XS

n is a value in the range 0-5. The value corresponds to the line card slot number in which the line card is installed.

Line card (The switch does not have actual FPCs—the line cards are the FPC equivalents on the switch.)

MIC (n)

Abbreviated name of the Modular Interface Card (MIC).

One of the following if EX9200-MPC line card is installed:

  • 10X10GE SFPP

  • 20X1GE SFP MACSEC

  • 40x1GE RJ45

n is a value in the range 0-1.

Line card

Note:

The switch does not have actual MICs except in the EX9200-MPC line card—the line cards are the MIC equivalents on the switch. EX9200-MPC is a modular line card that accepts any of the following MICs:

  • EX9200-10XS-MIC

  • EX9200-20F-MIC

  • EX9200-40T-MIC

PIC (n)

Abbreviated name of the Physical Interface Card (PIC).

n is a value in the range 0-3.

Line card (The switch does not have actual PICs.)

Xcvr (n)

Abbreviated name of the transceiver.

n is a value equivalent to the number of the port in which the transceiver is installed.

Optical transceivers

Pluggable Transceivers Supported on EX9200 Switches

Fan tray

Enhanced Left Fan Tray

Fan tray

Cooling System and Airflow in an EX9208 Switch

Chassis Physical Specifications of an EX9208 Switch

The EX9208 switch chassis is a rigid sheet-metal structure that houses the other switch components. Table 5 summarizes the physical specifications of the EX9208 switch chassis. See Figure 4, Figure 5, and Figure 6.

Table 5: Physical Specifications of the EX9208 Switch Chassis

Description

Weight

Height

Width

Depth

Chassis

Chassis with midplane, craft interface (front-panel display), fan tray, aChassis Physical Specifications of an EX9208 Switchir filter, and cable management brackets: 65.5  lb (29.7 kg)

Maximum configuration: 163.6 lb (74.2 kg)

14.0 in. (35.6 cm)

17.5 in. (44.5 cm)

24.5 in. (62.2 cm) (from front to chassis rear) Total depth (including cable management brackets) 27.75 in. (70.5 cm)

Routing Engine module (RE module)

2.4 lb (1.9 kg)

1.25 in. (3.2 cm)

11 in. (27.9 cm)

7.75 in. (19.7 cm)

Switch Fabric module (SF module)

9.6 lb (4.4 kg) (with Routing Engine installed)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

Fan Tray

6.8 lb (3.84 kg)

11.58 in. (29.4 cm)

1.76 in. (4.5 cm)

23.3 in. (59.2 cm)

Air filter

1.0 lb (0.5 kg)

10.1 in. (25.7 cm)

0.31 in. (0.8 cm)

22.23 in. (56.5 cm)

Cable Management Brackets

0.3 lb (0.8 kg)

9.9 in. (25.1 cm)

0.25 in. (0.6 cm)

4.5 in. (11.4 cm)

AC power supply

6.6 lb (2.99 kg)

1.75 in. (4.4 cm)

14.5 in. (36.8 cm)

4 in. (10.2 cm)

DC power supply

6.2 lb (2.81 kg)

1.75 in. (4.4 cm)

14.5 in. (36.8 cm)

4 in. (10.2 cm)

EX9200-2C-8XS line card

19.4 lb (8.8 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-4QS line card

16.8 lb (7.6 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-6QS line card

21 lb (9.25 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-MPC line card

15.96 lb (7.3 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-10XS-MIC

1.54 lb (0.7 kg)

1.25 in. (3.2 cm)

6.67 in. (16.9 cm)

7.86 in. (20 cm)

EX9200-20F-MIC

1.2 lb (0.54 kg)

1.25 in. (3.2 cm)

6.67 in. (16.9 cm)

7.86 in. (20 cm)

EX9200-40T-MIC

1.9 lb (0.9 kg)

1.25 in. (3.2 cm)

13.36 in. (33.9 cm)

22 in. (55.9 cm)

EX9200-12QS line card

15.7 lb (7.12 kg)

1.25 in. (3.2 cm

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-32XS line card

19.2 lb (8.7 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-40T line card

14.0 lb (6.6 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-40F line card

14.8 lb (6.7 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-40F-M line card

14.8 lb (6.7 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

EX9200-40XS line card

17 lb (7.7 kg)

1.25 in. (3.2 cm)

17 in. (43.2 cm)

22 in. (55.9 cm)

Figure 4: EX9208 Switch
EX9208 Switch
Figure 5: EX9208 Switch with AC Power Supplies
EX9208 Switch with
AC Power Supplies
Figure 6: EX9208 Switch with DC Power Supplies
EX9208 Switch with
DC Power Supplies

You can mount an EX9208 switch on a standard 19-in. four-post rack or a standard 800-mm enclosed cabinet. You can mount up to six EX9208 switches in a standard (48 rack unit (U)) rack.

Field-Replaceable Units in an EX9200 Switch

Field-replaceable units (FRUs) are switch components that you can replace at your site. The EX9200 switch uses the following types of FRUs:

  • Hot-insertable and hot-removable—You can remove and replace these components without powering off the switch or disrupting the switching function.

  • Hot-pluggable—You can remove and replace these components without powering off the switch, but the switching function is interrupted until you replace the component.

Table 6 lists the FRUs for the EX9200 switch and their types.

Table 6: FRUs in an EX9200 Switch

FRU

Type

Power supplies

Hot-insertable and hot-removable.

Fan tray and air filter

Hot-insertable and hot-removable.

Routing Engine module (RE module)

Redundant configuration:

  • Master RE module is hot-pluggable.

  • Backup RE module is hot-insertable and hot-removable.

Base configuration:

See EX9204 Switch Configurations, EX9208 Switch Configurations, and EX9214 Switch Configurations.

Switch Fabric module (SF module)

Redundant configuration:

  • Master SF module is hot-pluggable.

  • Backup SF module is hot-insertable and hot-removable.

Base configuration:

See EX9204 Switch Configurations, EX9208 Switch Configurations, and EX9214 Switch Configurations.

Line cards

Hot-insertable and hot-removable. We recommend that you take the line cards offline before removing them. See Removing a Line Card from an EX9200 Switch.

SFP, SFP+, QSFP+, and CFP transceivers

See Pluggable Transceivers Supported on EX9200 Switches for the Junos OS release in which the transceivers were introduced.

Hot-insertable and hot-removable.

Note

Line cards are not part of the base or redundant configuration. You must order them separately.

Note

If you have a Juniper J-Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/ . Failure to do so can result in significant delays if you need replacement parts. This note does not apply if you replace existing components with the same type of component.