Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

EX2300 System Overview

 

EX2300 Switches Hardware Overview

Juniper Networks EX Series Ethernet Switches provide scalable connectivity for the enterprise market, including branch offices, campus locations, and data centers. The Juniper Networks EX2300 Ethernet Switches run the Juniper Networks Junos operating system (Junos OS), which provides Layer 2 and Layer 3 switching, routing, and security services.

EX2300 switches provide connectivity for low-density environments.

Benefits of the EX2300 Switch

Economical—EX2300 switches offer an economical, entry-level, standalone solution for access-layer deployments in branch and remote offices, as well as enterprise campus networks. 1 Gbps and 2.5 Gbps access port options provide high speed options, especially when connecting to 802.11ac Wave 2 access points.

High flexibility and class leading features—EX2300 switches provide the highest levels of flexibility and features in its class to support data, voice, and video environments, delivering a reliable platform for unifying enterprise communications.

Support for Juniper Networks Junos Fusion Enterprise—EX2300 switches can act as a satellite device to support a Juniper Networks Junos Fusion Enterprise deployment, which can combine several wiring closets into one logical management platform. In smaller networks, you can connect up to four EX2300 switches in a Virtual Chassis configuration, allowing them to be managed as a single switch.

EX2300 Switches First View

EX2300 switches are available in models with 12 or 24, or 48 built-in network ports that support RJ-45 cable connectors. The compact, fanless EX2300-C switches have 12 RJ-45 network ports.

EX2300 switches provide:

  • Up to six 10-Gigabit Ethernet uplink ports that support small form-factor pluggable plus (SFP+) transceivers and small form-factor pluggable (SFP) transceivers.

  • 12 (in EX2300-C switches), 16, 24, 32, or 48 built-in Gigabit Ethernet RJ-45 network ports with 10/100/1000 BASE-T connectors.

  • Eight or 16 built-in Gigabit Ethernet RJ-45 network ports with 100/1000/2500 BASE-T connectors.

  • Virtual Chassis capability—You can connect up to four EX2300 switches (including EX2300-C switches) to form one unit that you manage as a single chassis, called a Virtual Chassis.

  • Power over Ethernet (PoE) or Power over Ethernet Plus (PoE+) on all RJ-45 network ports (in PoE-capable models).

Uplink Ports

EX2300-C switches have two 10-Gigabit Ethernet uplink ports. EX2300 switches except the EX2300-C switch model and the EX2300-48MP switch model have four 10-Gigabit Ethernet uplink ports. The EX2300-48MP switch model has six 10-Gigabit Ethernet uplink ports. These uplink ports support SFP and SFP+ transceivers. You can use these uplink ports as network ports or configure these ports as Virtual Chassis ports (VCPs) and use them to connect up to four switches by using SFP+ transceivers to form a Virtual Chassis.

Note

You cannot form a Virtual Chassis by using SFP transceivers.

For forming a Virtual Chassis, you must explicitly configure an uplink port on each of the switches to be connected as a VCP. See Setting an Uplink Port on an EX Series or QFX Series Switch as a Virtual Chassis Port.

For information about the supported optical and copper interfaces, see Pluggable Transceivers Supported on EX2300 Switches.

Console Ports

EX2300 switches except the EX2300-24MP and EX2300-48MP switch models have two console ports—an RJ-45 console port and a Mini-USB Type-B console port. EX2300-24MP and EX2300-48MP switch models have an RJ-45 console port. The RJ-45 port accepts a cable that has an RJ-45 connector and the Mini-USB Type-B port accepts a Mini-B plug (5-pin) connector to connect the switch to a console management device.

Cable Guard

On an EX2300-C switch, you can install a cable guard to secure the cables connected to the switch. The cable guard has slots in the front of it through which you can pass all the cables to prevent them from being accidently unplugged or removed after they are connected. See Mounting an EX2300 Switch on a Desk or Other Level Surface, Mounting an EX2300-C Switch Under a Desk or Other Level Surface by Using Screws, and Mounting an EX2300-C Switch on or Under a Surface Made of Ferrous Material.

Security Slot

An EX2300-C switch has a security slot on the right panel of the chassis. You can use the security slot to lock and secure the chassis in the installation site with a standard cable lock. See Mounting an EX2300 Switch on a Desk or Other Level Surface, Mounting an EX2300-C Switch Under a Desk or Other Level Surface by Using Screws, and Mounting an EX2300-C Switch on or Under a Surface Made of Ferrous Material.

Power over Ethernet (PoE) Ports

EX2300 switches are available with or without PoE/PoE+ capability. Models that support PoE/PoE+ provide that support on all RJ-45 network ports. PoE ports provide electrical current to devices—such as IP phones, wireless access points, and security cameras—through network cables, thus eliminating the need for separate power cords for those devices. Uplink ports do not support PoE.

Note

IEEE 802.3at class 4 powered devices require category 5 or higher Ethernet cables.

The remainder of this topic uses the term PoE to refer to both PoE and PoE+ unless there is a need to distinguish between the two.

Front Panel of an EX2300 Switch

The front panel of an EX2300-C switch consists of the following components:

  • RJ-45 network ports—depending on the switch model, either of:

    • 12 10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability in EX2300-C-12P

    • 12 10/100/1000 BASE-T Gigabit Ethernet ports without PoE capability in EX2300-C-12T

  • One USB port

  • One management Ethernet port

  • Three chassis status LEDs

  • Four port status mode LEDs in models with PoE capability and three port status mode LEDs in models without PoE capability

  • One Factory Reset/Mode button

  • One mini-USB console port

  • One RJ-45 console port

  • Two built-in 10-Gigabit Ethernet uplink ports. You can use the uplink ports to forward network traffic or configure them as VCPs to interconnect EX2300 switches into a Virtual Chassis.

  • One electrostatic discharge (ESD) point

Figure 1 shows the front panel of an EX2300-C switch with 12 Gigabit Ethernet ports with PoE capability and Figure 2 shows the front panel of an EX2300-C switch with 12 Gigabit Ethernet ports without PoE capability.

Figure 1: Front Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports with PoE Capability
Front Panel
of an EX2300-C Switch with 12 Gigabit Ethernet Ports with PoE Capability
  1
RJ-45 network ports
  6
Factory Reset/Mode button
  2
USB port
  7
Mini-USB console port
  3
Management Ethernet port
  8
RJ-45 console port
  4
Chassis status LEDs
  9
10-Gigabit Ethernet uplink ports
  5
Port status mode LEDs. The LED labeled PoE is present only on models with PoE capability.
10
ESD point
Figure 2: Front Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports without PoE Capability
Front Panel of
an EX2300-C Switch with 12 Gigabit Ethernet Ports without PoE Capability
  1
RJ-45 network ports
  6
Factory Reset/Mode button
  2
USB port
  7
Mini-USB console port
  3
Management Ethernet port
  8
RJ-45 console port
  4
Chassis status LEDs
  9
10-Gigabit Ethernet uplink ports
  5
Port status mode LEDs
10
ESD point

The front panel of EX2300 switches except the EX2300-C, EX2300-24MP, and EX2300-48MP switch models consists of the following components:

  • RJ-45 network ports—depending on the switch model, either of:

    • 24 10/100/1000 BASE-T Gigabit Ethernet ports without PoE capability in the EX2300-24T and EX2300-24T-DC models

    • 48 10/100/1000 BASE-T Gigabit Ethernet ports without PoE capability in the EX2300-48T model

    • 24 10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability in the EX2300-24P model

    • 48 10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability in the EX2300-48P model

  • Three chassis status LEDs

  • Four port status mode LEDs in models with PoE capability and three port status mode LEDs in models without PoE capability

  • One Factory Reset/Mode button

  • One mini-USB console port

  • Four built-in 10-Gigabit Ethernet uplink ports. You can use these ports to forward network traffic or configure them into VCPs to interconnect EX2300 switches into a Virtual Chassis.

Figure 3 shows the front panel of an EX2300 switch with 24 Gigabit Ethernet ports with PoE capability except the EX2300-24MP model and Figure 4 shows the front panel of an EX2300 switch with 48 Gigabit Ethernet ports except the EX2300-48MP model.

Figure 3: Front Panel of an EX2300 Switch with 24 Gigabit Ethernet Ports with PoE Capability Except the EX2300-24MP Model
Front Panel of
an EX2300 Switch with 24 Gigabit Ethernet Ports with PoE Capability
Except the EX2300-24MP Model
  1
RJ-45 network ports
  4
Factory Reset/Mode button
  2
Chassis status LEDs
  5
Mini-USB console port
  3
Port status mode LEDs. The LED labeled PoE is present only on models with PoE capability.
  6
10-Gigabit Ethernet uplink ports
Figure 4: Front Panel of an EX2300 Switch with 48 Gigabit Ethernet Ports with PoE Capability Except the EX2300-48MP Model
Front Panel of
an EX2300 Switch with 48 Gigabit Ethernet Ports with PoE Capability
Except the EX2300-48MP Model
  1
RJ-45 network ports
  4
Factory Reset/Mode button
  2
Chassis status LEDs
  5
Mini-USB console port
  3
Port status mode LEDs. The LED labeled PoE is present only on models with PoE capability.
  6
10-Gigabit Ethernet uplink ports

The front panel of EX2300-24MP switch models consists of the following components:

  • QR code

  • System LEDs

  • One USB port

  • One management port

  • Eight 100/1000/2500 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability

  • 16 10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability

  • Four built-in 10-Gigabit Ethernet uplink ports. You can use these ports to forward network traffic or configure them into VCPs to interconnect EX2300 switches into a Virtual Chassis.

  • One RJ-45 console port

The front panel of EX2300-48MP switch models consists of the following components:

  • QR code

  • System LEDs

  • One USB port

  • One management port

  • One RJ-45 console port

  • 16 100/1000/2500 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability

  • 32 10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability

  • Six built-in 10-Gigabit Ethernet uplink ports. You can use these ports to forward network traffic or configure them into VCPs to interconnect EX2300 switches into a Virtual Chassis.

Figure 5 shows the front panel of an EX2300-24MP switch and Figure 6 shows the front panel of an EX2300-48MP switch.

Figure 5: Front Panel of an EX2300-24MP Switch
Front Panel of an
EX2300-24MP Switch
  1
QR code
  5
10/100/1000 BASE-T Gigabit Ethernet ports
  2
System LEDs
  6
10-Gigabit Ethernet uplink ports
  3
Management port
  7
Console port
  4
100/1000/2500 BASE-T Gigabit Ethernet ports
  8
USB port
Figure 6: Front Panel of an EX2300-48MP Switch
Front Panel of an
EX2300-48MP Switch
  1
QR code
  5
10-Gigabit Ethernet uplink ports
  2
System LEDs
  6
Management port
  3
10/100/1000 BASE-T Gigabit Ethernet ports with PoE/PoE+ capability
  7
Console port
  4
100/1000/2500 BASE-T Gigabit Ethernet ports
  8
USB port

Rear Panel of an EX2300 Switch

The rear panel of an EX2300-C switch consists of the following components:

  • Serial number ID label

  • CLEI code label

  • One protective earthing terminal

  • Heatsink

  • One AC power cord inlet

Figure 7 shows the rear panel of an EX2300-C switch with 12 Gigabit Ethernet ports with PoE capability and Figure 8 shows the rear panel of an EX2300-C switch with 12 Gigabit Ethernet ports without PoE capability.

EX2300-C switches being fanless models have no exhaust openings. EX2300 switches have vents on the top of the chassis. The PoE models have a heatsink installed in the rear panel to dissipate heat, while non-PoE models have no heatsink.

Figure 7: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports with PoE Capability
Rear Panel of an EX2300-C
Switch with 12 Gigabit Ethernet Ports with PoE Capability
  1
CLEI code label
  4
Heatsink—only in PoE models
  2
Serial number ID label
  5
AC power cord inlet
  3
Protective earthing terminal
 
Figure 8: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports without PoE Capability
Rear Panel of an EX2300-C
Switch with 12 Gigabit Ethernet Ports without PoE Capability
  1
CLEI code label
  3
Protective earthing terminal
  2
Serial number ID label
  4
AC power cord inlet

The rear panel of the EX2300 switch except the EX2300-C, EX2300-24MP, and EX2300-48MP switch models consists of the following components:

  • One management Ethernet port that supports an RJ-45 connector

  • One console port that supports an RJ-45 connector

  • One protective earthing terminal

  • One ESD point

  • Air exhaust openings

  • Serial number ID label

  • CLEI code label

  • One AC power cord inlet or DC power terminals

  • One USB port

Figure 9 shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit Ethernet ports with PoE capability except the EX2300-24MP model and Figure 10 shows the rear panel of an EX2300 switch with 48 Gigabit Ethernet ports with PoE capability except the EX2300-48MP model. Figure 11 shows the rear panel of an AC-powered EX2300 switch with 24 Gigabit Ethernet ports without PoE capability and Figure 12 shows the rear panel of an EX2300 switch with 48 Gigabit Ethernet ports without PoE capability. Figure 13 shows the rear panel of a DC-powered EX2300 switch with 24 Gigabit Ethernet ports.

Note

DC-powered EX2300 switches do not provide PoE.

The AC power cord retainer clips in EX2300 switches except the EX2300-24MP model and the EX2300-48MP model extend out of the chassis by 3 in (7.62 cm).

Figure 9: Rear Panel of an AC-Powered EX2300 Switch with 24 Gigabit Ethernet Ports with PoE Capability Except the EX2300-24MP Model
Rear Panel of an
AC-Powered EX2300 Switch with 24 Gigabit Ethernet Ports with PoE Capability
Except the EX2300-24MP Model
  1
USB port
  6
Air exhaust openings
  2
Management Ethernet port
  7
Serial number ID label
  3
RJ-45 console port
  8
CLEI code label
  4
Protective earthing terminal
  9
AC power cord inlet
  5
ESD point
 
Figure 10: Rear Panel of an AC-Powered EX2300 Switch with 48 Gigabit Ethernet Ports with PoE Capability Except the EX2300-48MP Model
Rear Panel of an
AC-Powered EX2300 Switch with 48 Gigabit Ethernet Ports with PoE Capability
Except the EX2300-48MP Model
  1
USB port
  6
Air exhaust openings
  2
Management Ethernet port
  7
Serial number ID label
  3
RJ-45 console port
  8
CLEI code label
  4
Protective earthing terminal
  9
AC power cord inlet
  5
ESD point
 
Figure 11: Rear Panel of an AC-Powered EX2300 Switch with 24 Gigabit Ethernet Ports without PoE Capability
Rear Panel of an
AC-Powered EX2300 Switch with 24 Gigabit Ethernet Ports without PoE
Capability
  1
USB port
  6
Air exhaust opening
  2
Management Ethernet port
  7
Serial number ID label
  3
RJ-45 console port
  8
CLEI code label
  4
Protective earthing terminal
  9
AC power cord inlet
  5
ESD point
 
Figure 12: Rear Panel of an AC-Powered EX2300 Switch with 48 Gigabit Ethernet Ports without PoE Capability
Rear Panel of an
AC-Powered EX2300 Switch with 48 Gigabit Ethernet Ports without PoE
Capability
  1
USB port
  6
Air exhaust opening
  2
Management Ethernet port
  7
Serial number ID label
  3
RJ-45 console port
  8
CLEI code label
  4
Protective earthing terminal
  9
AC power cord inlet
  5
ESD point
 
Figure 13: Rear Panel of a DC-Powered EX2300 Switch with 24 Gigabit Ethernet Ports
Rear Panel of a DC-Powered
EX2300 Switch with 24 Gigabit Ethernet Ports
  1
USB port
  6
Air exhaust opening
  2
Management Ethernet port
  7
Serial number ID label
  3
RJ-45 console port
  8
CLEI code label
  4
Protective earthing terminal
  9
DC power terminals
  5
ESD point
 

The rear panel of EX2300-24MP and EX2300-48MP switch models consists of the following components:

  • CLEI code label

  • Serial number ID label

  • One ESD point

  • One AC power cord inlet

Figure 14 shows the rear panel of an EX2300-24MP switch and Figure 15 shows the rear panel of an EX2300-48MP switch.

Figure 14: Rear Panel of an EX2300-24MP Switch
Rear Panel of an EX2300-24MP
Switch
  1
CLEI code label
  3
ESD point
  2
Serial number ID label
  4
AC power cord inlet
Figure 15: Rear Panel of an EX2300-48MP Switch
Rear Panel of an EX2300-48MP
Switch
  1
CLEI code label
  3
AC power cord inlet
  2
Serial number ID label
  4
ESD point

EX2300 Switch Models

The EX2300 switch is available with 12 or 24, or 48 built-in RJ-45 network ports with full Power over Ethernet (PoE) or Power over Ethernet plus (PoE+) capability on all built-in RJ-45 network ports (access ports), or no PoE capability. Table 1 lists the EX2300 switch models.

EX2300-C switches have two uplink ports. EX2300 switches except the EX2300-C switch model and the EX2300-48MP switch model have four uplink ports. The EX2300-48MP switch model has six 10-Gigabit Ethernet uplink ports. These uplink ports support SFP and SFP+ transceivers. You can use these uplink ports as network ports or configure these ports as Virtual Chassis ports (VCPs) and use them to connect up to four switches by using SFP+ transceivers to form a Virtual Chassis. You cannot form a Virtual Chassis by using SFP transceivers. Uplink ports do not support PoE.

Table 1: EX2300 Switch Models

Model

Access Ports

Virtual Chassis License

Ports in Which PoE Is Available

Maximum System Power Available for PoE/PoE+

First Junos OS Release

EX2300-C-12T

12 Gigabit Ethernet

Not available

15.1X53-D50

EX2300-C-12T-VC

12 Gigabit Ethernet

Available

15.1X53-D50

EX2300-C-12T-TAA

12 Gigabit Ethernet

Not available

15.1X53-D50

EX2300-C-12P

12 Gigabit Ethernet

Not available

All 12 ports

124 W

15.1X53-D50

EX2300-C-12P-VC

12 Gigabit Ethernet

Available

All 12 ports

124 W

15.1X53-D50

EX2300-C-12P-TAA

12 Gigabit Ethernet

Not available

All 12 ports

124 W

15.1X53-D50

EX2300-24T

24 Gigabit Ethernet

Not available

15.1X53-D50

EX2300-24T-VC

24 Gigabit Ethernet

Available

15.1X53-D50

EX2300-24T-TAA

24 Gigabit Ethernet

Not available

15.1X53-D50

EX2300-24T-DC

24 Gigabit Ethernet

Not available

15.1X53-D51

EX2300-24P

24 Gigabit Ethernet

Not available

All 24 ports

370 W

15.1X53-D50

EX2300-24P-VC

24 Gigabit Ethernet

Available

All 24 ports

370 W

15.1X53-D50

EX2300-24P-TAA

24 Gigabit Ethernet

Not available

All 24 ports

370 W

15.1X53-D50

EX2300-24MP

24 Gigabit Ethernet

Not available

All 24 ports

380 W

18.1R2

EX2300-48T

48 Gigabit Ethernet

Not available

15.1X53-D55

EX2300-48T-VC

48 Gigabit Ethernet

Available

15.1X53-D55

EX2300-48T-TAA

48 Gigabit Ethernet

Not available

15.1X53-D55

EX2300-48P

48 Gigabit Ethernet

Not available

All 48 ports

740 W

15.1X53-D55

EX2300-48P-VC

48 Gigabit Ethernet

Available

All 48 ports

740 W

15.1X53-D55

EX2300-48P-TAA

48 Gigabit Ethernet

Not available

All 48 ports

740 W

15.1X53-D55

EX2300-48MP

48 Gigabit Ethernet

Not available

All 48 ports

740 W

18.1R2

EX2300 Switch Hardware and CLI Terminology Mapping

This topic describes the hardware terms used in EX2300 switch documentation and the corresponding terms used in the Junos OS CLI. See Table 2.

Table 2: CLI Equivalents of Terms Used in Documentation for EX2300 Switches

Hardware Item (as Displayed in the CLI)

Description (as Displayed in the CLI)

Value (as Displayed in the CLI)

Item in Documentation

Additional Information

Chassis

One of the following:

  • EX2300-C-12T

  • EX2300-C-12P

  • EX2300-24T

  • EX2300-24P

  • EX2300-24MP

  • EX2300-24T-DC

  • EX2300-48T

  • EX2300-48P

  • EX2300-48MP

Switch chassis

Chassis Physical Specifications for EX2300 Switches

FPC (n)

Abbreviated name of the Flexible PIC Concentrator (FPC)

One of the following:

  • EX2300-C-12T

  • EX2300-C-12P

  • EX2300-24T

  • EX2300-24P

  • EX2300-24MP

  • EX2300-24T-DC

  • EX2300-48T

  • EX2300-48P

  • EX2300-48MP

Value of n is always 0.

The switch does not have actual FPCs. In this case, FPC refers to the switch itself.

Understanding Interface Naming Conventions

On EX2300 Virtual Chassis:

  • Member ID of the switch within the Virtual Chassis

n is a value in the range of 0 through 3.

In this case, the FPC number refers to the member ID assigned to the switch.

Understanding Virtual Chassis Components

PIC (n)

Abbreviated name of the Physical Interface Card (PIC)

n is a value in the range 0 through 1.

The switch does not have actual PIC devices; see entries for PIC 0 through PIC 1 for the equivalent item on the switch

Understanding Interface Naming Conventions

One of the following:

  • 12x 10/100/1000 BASE-T

  • 16x10M/100M/1G Base-T & 8x100M/1G/2.5G Base-T

  • 24x 10/100/1000 BASE-T

  • 48x 10/100/1000 BASE-T

  • 32x10/100/1G Base-T & 16x100M/1G/2.5G Base-T

PIC 0

Built-in RJ-45 network ports on the front panel of the switch

EX2300 Switches Hardware Overview

One of the following:

  • 2x10G SFP/SFP+

    or

  • 4x10G SFP/SFP+

  • 4x1G/10G SFP/SFP+

  • 6x10G SFP/SFP+

  • 6x1G/10G SFP/SFP+

PIC 1

Built-in uplink ports on the front panel of the switch

EX2300 Switches Hardware Overview

Xcvr (n)

Abbreviated name of the transceiver

n is a value equivalent to the number of the port in which the transceiver is installed.

Optical transceivers

Pluggable Transceivers Supported on EX2300 Switches

Power Supply (n)

Built-in power supply

Value of n is always 0.

AC power supply or DC power supply

Power Supply in EX2300 Switches

Fan Tray

Fan

Note: EX2300-C switches are fanless models.

Fan

EX2300 Cooling System

Chassis Physical Specifications for EX2300 Switches

The EX2300 switch chassis is a rigid sheet-metal structure that houses the hardware components. Table 3 summarizes the physical specifications of the EX2300 switch chassis.

Table 3: Physical Specifications of the EX2300 Switch Chassis

Description

EX2300-C Value

EX2300 Value

Chassis height

1.72 in. (4.36 cm)

  • All models except EX2300-24MP and EX2300-48MP—1.75 in.(4.45 cm)

  • EX2300-24MP and EX2300-48MP models—1.7 in. (4.33 cm)

Chassis width

  • 10.98 in. (27.9 cm)

  • 18.86 in. (47.9 cm) with mounting brackets attached

  • All models except EX2300-24MP and EX2300-48MP

    • 17.4 in. (44.19 cm)

    • 19 in. (48.26 cm) with mounting brackets attached

  • EX2300-24MP and EX2300-48MP models

    • 17.36 in. (44.09 cm)

    • 18.95 in. (48.13 cm) with mounting brackets attached

Chassis depth

9.45 in. (23.8 cm)

  • All models except EX2300-24MP and EX2300-48MP

    • Models without PoE capability: 10.2 in. (25.9 cm)

    • Models with PoE capability: 12.2 in. (30.98 cm)

  • EX2300-24MP—10 in. (25.4 cm)

  • EX2300-48MP—14.45 in. (36.71 cm)

Weight

  • EX2300-C-12T: 5.45 lb (2.48 kg)

  • EX2300-C-12P: 6.99 lb (3.17 kg)

  • EX2300-24T: 7.25 lb (3.29 kg)

  • EX2300-24P: 9.89 lb (4.49 kg)

  • EX2300-24MP: 8.8 lb (4 kg)

  • EX2300-24T-DC: 7.83 lb (3.55 kg)

  • EX2300-48T: 8.28 lb (3.76 kg)

  • EX2300-48P: 11.06 lb (5.02 kg)

  • EX2300-48MP: 14.33 lb (6.5 kg)