Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

EX2200 Management Cable Specifications and Pinouts

 

Management Cable Specifications

Table 1 lists the specifications for the cables that connect the console and management ports to management devices.

Table 1: Specifications of Cables to Connect to Management Devices

Ports

Cable Specifications

Receptacle

Additional Information

RJ-45 Console port

CAT5e UTP (unshielded twisted pair) cable

RJ-45

Connect a Device to a Management Console Using an RJ-45 Connector

Management Ethernet port

Ethernet cable with an RJ-45 connector

RJ-45

Connect a Device to a Network for Out-of-Band Management

Mini-USB Type-B Console port

Mini-USB cable with standard-A and Mini-USB Type-B (5-pin) connector

Mini-USB

 

Console Port Connector Pinout Information

The console port on a Juniper Networks device is an RS-232 serial interface that uses an RJ-45 connector to connect to a console management device. The default baud rate for the console port is 9600 baud.

Table 2 provides the pinout information for the RJ-45 console connector.

Note

If your laptop or desktop PC does not have a DB-9 plug connector pin and you want to connect your laptop or desktop PC directly to a device, use a combination of the RJ-45 to DB-9 socket adapter and a USB to DB-9 plug adapter. You must provide the USB to DB-9 plug adapter.

Table 2: Console Port Connector Pinout Information

Pin

Signal

Description

1

RTS Output

Request to send

2

DTR Output

Data terminal ready

3

TxD Output

Transmit data

4

Signal Ground

Signal ground

5

Signal Ground

Signal ground

6

RxD Input

Receive data

7

CD Input

Data carrier detect

8

NC

CTS Input

Mini-USB Port Pinout Specifications

If your management host (laptop or PC) does not have a DB-9 plug connector pin or an RJ-45 connector pin but has a USB port, you can connect your management host to the Mini-USB Type-B console port by using a cable that has a standard Type-A USB connector on one end and a Mini-USB Type-B (5-pin) connector on the other end.

The Mini-USB Type-B console port uses a Mini-USB Type-B connector to connect to a console management device. The default baud rate for the console port is 9600 baud.

Table 3 provides the pinout information of the Mini-USB Type-B console port.

Table 3: Mini-USB Type-B Console Port Pinout Information

Pin

Signal

Description

1

VCC

+5 VDC

2

D-

Data -

3

D+

Data +

X

N/C

Could be not connected (N/C), connected to ground (GND), or used as an attached device presence indicator

4

GND

Ground

USB Port Specifications for an EX Series Switch

The following Juniper Networks USB flash drives have been tested and are officially supported for the USB port on all EX Series switches:

  • RE-USB-1G-S

  • RE-USB-2G-S

  • RE-USB-4G-S

Caution

Any USB memory product not listed as supported for EX Series switches has not been tested by Juniper Networks. The use of any unsupported USB memory product could expose your EX Series switch to unpredictable behavior. Juniper Networks Technical Assistance Center (JTAC) can provide only limited support for issues related to unsupported hardware. We strongly recommend that you use only supported USB flash drives.

All USB flash drives used on EX Series switches must have the following features:

  • USB 2.0 or later.

  • Formatted with a FAT or MS-DOS file system.

  • If the switch is running Junos OS Release 9.5 or earlier, the formatting method must use a primary boot record. Microsoft Windows formatting, by default, does not use a primary boot record. See the documentation for your USB flash drive for information about how your USB flash drive is formatted.

RJ-45 Management Port Connector Pinout Information

Table 4 provides the pinout information for the RJ-45 connector for the management port on Juniper Networks devices.

Table 4: RJ-45 Management Port Connector Pinout Information

Pin

Signal

Description

1

TRP1+

Transmit/receive data pair 1

2

TRP1—

Transmit/receive data pair 1

3

TRP2+

Transmit/receive data pair 2

4

TRP3+

Transmit/receive data pair 3

5

TRP3—

Transmit/receive data pair 3

6

TRP2—

Transmit/receive data pair 2

7

TRP4+

Transmit/receive data pair 4

8

TRP4—

Transmit/receive data pair 4

RJ-45 Port, SFP Port, SFP+ Port, QSFP+ Port, and QSFP28 Port Connector Pinout Information

The tables in this topic describe the connector pinout information for the RJ-45, QSFP+, QSFP28, SFP+, and SFP ports.

  • Table 5—10/100/1000BASE-T Ethernet network port connector pinout information

  • Table 6—SFP network port connector pinout information

  • Table 7—SFP+ network port connector pinout information

  • Table 8—QSFP+ and QSFP28 network module ports connector pinout information

Table 5: 10/100/1000BASE-T Ethernet Network Port Connector Pinout Information

Pin

Signal

Description

1

TRP1+

Transmit/receive data pair 1

Negative Vport (in PoE models)

2

TRP1-

Transmit/receive data pair 1

Negative Vport (in PoE models)

3

TRP2+

Transmit/receive data pair 2

Positive Vport (in PoE models)

4

TRP3+

Transmit/receive data pair 3

5

TRP3-

Transmit/receive data pair 3

6

TRP2-

Transmit/receive data pair 2

Positive Vport (in PoE models)

7

TRP4+

Transmit/receive data pair 4

8

TRP4-

Transmit/receive data pair 4

Table 6: SFP Network Port Connector Pinout Information

Pin

Signal

Description

1

VeeT

Module transmitter ground

2

TX_Fault

Module transmitter fault

3

TX_Disable

Transmitter disabled

4

SDA

2-wire serial interface data line

5

SCL-

2-wire serial interface clock

6

MOD_ABS

Module absent

7

RS

Rate select

8

RX_LOS

Receiver loss of signal indication

9

VeeR

Module receiver ground

10

VeeR

Module receiver ground

11

VeeR

Module receiver ground

12

RD-

Receiver inverted data output

13

RD+

Receiver noninverted data output

14

VeeR

Module receiver ground

15

VccR

Module receiver 3.3 V supply

16

VccT

Module transmitter 3.3 V supply

17

VeeT

Module transmitter ground

18

TD+

Transmitter noninverted data input

19

TD-

Transmitter inverted data input

20

VeeT

Module transmitter ground

Table 7: SFP+ Network Port Connector Pinout Information

Pin

Signal

Description

1

VeeT

Module transmitter ground

2

TX_Fault

Module transmitter fault

3

TX_Disable

Transmitter disabled

4

SDA

2-wire serial interface data line

5

SCL-

2-wire serial interface clock

6

MOD_ABS

Module absent

7

RS0

Rate select 0, optionally controls SFP+ module receiver

8

RX_LOS

Receiver loss of signal indication

9

RS1

Rate select 1, optionally controls SFP+ transmitter

10

VeeR

Module receiver ground

11

VeeR

Module receiver ground

12

RD-

Receiver inverted data output

13

RD+

Receiver noninverted data output

14

VeeR

Module receiver ground

15

VccR

Module receiver 3.3-V supply

16

VccT

Module transmitter 3.3-V supply

17

VeeT

Module transmitter ground

18

TD+

Transmitter noninverted data input

19

TD-

Transmitter inverted data input

20

VeeT

Module transmitter ground

Table 8: QSFP+ and QSFP28 Network Port Connector Pinout Information

Pin

Signal

1

GND

2

TX2n

3

TX2p

4

GND

5

TX4n

6

TX4p

7

GND

8

ModSelL

9

LPMode_Reset

10

VccRx

11

SCL

12

SDA

13

GND

14

RX3p

15

RX3n

16

GND

17

RX1p

18

RX1n

19

GND

20

GND

21

RX2n

22

RX2p

23

GND

24

RX4n

25

RX4p

26

GND

27

ModPrsL

28

IntL

29

VccTx

30

Vcc1

31

Reserved

32

GND

33

TX3p

34

TX3n

35

GND

36

TX1p

37

TX1n

38

GND

RJ-45 to DB-9 Serial Port Adapter Pinout Information

The console port is an RS-232 serial interface that uses an RJ-45 connector to connect to a management device such as a laptop or a desktop PC. If your laptop or desktop PC does not have a DB-9 plug connector pin and you want to connect your laptop or desktop PC to the device, use a combination of the RJ-45 to DB-9 socket adapter along with a USB to DB-9 plug adapter.

Table 9 provides the pinout information for the RJ-45 to DB-9 serial port adapter.

Table 9: RJ-45 to DB-9 Serial Port Adapter Pinout Information

RJ-45 Pin

Signal

DB-9 Pin

Signal

1

RTS

8

CTS

2

DTR

6

DSR

3

TxD

2

RxD

4

GND

5

GND

6

RxD

3

TxD

7

DSR

4

DTR

8

CTS

7

RTS