Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

QFX5700 Cable Management System

 

The QFX5700 Cable Management System consists of the following components.

  • Cable Manager

  • Cable Manager Assembly

  • Tray

  • Locking mechanism

Note

You need to necessarily attach the Cable manager assembly when you install six or more line cards of the same model.

QFX5700 Cable Management System The cable manager allows you to manage a large number of fiber-optic and copper cables attached to the RCBs and FPCs installed in the QFX5700 switch. It is installed in the front of the QFX5700 chassis.

Figure 1: Cable Manager
Cable Manager

Figure 2

Figure 2: Remove Cable Manager Assembly
Remove Cable
Manager Assembly

Figure 3

Figure 3: Install Cable Manager Assembly
Install Cable Manager Assembly

Pull out the spring-loaded pin on either sides of the cable manager and move the tray down to access RCB.

Figure 4

Figure 4: Move the Tray to Access RCB
Move the Tray to Access RCB

Figure 5

Figure 5: Move the Tray to Access FPC
Move the Tray to Access FPC

Figure 6

Figure 6: Lock the Cable Manager
Lock the Cable Manager

Figure 8 and Figure 7 show how to route cables through the cable manager.

Figure 7: Route Cables through Cable Manager
Route Cables through Cable Manager

Once you use the cable manager to router the cables, assemble the cable manager cover.

Figure 8: Assemble the Cable Manager Cover
Assemble the Cable Manager Cover

Figure 9

Figure 9: Remove Cable Manager
Remove Cable Manager