Verifying the State of the Interfaces on a Line-Card Chassis
Purpose
After a line-card chassis (LCC) has booted, verify the state interfaces within the routing matrix.
Action
- Verify
that all interfaces in the LCC are up by issuing the show interfaces
terse command:
user@host> show interfaces terse lcc 0Interface Admin Link Proto Local Remote pfe-7/0/0 up up pfe-7/0/0.16383 up up inet inet6 pfh-7/0/0 up up pfh-7/0/0.16383 up up inet xe-7/0/0 up up xe-7/0/0.0 up up inet 10.20.1.1/24 multiservice xe-7/0/1 up up xe-7/0/1.0 up up inet 10.20.2.1/24 multiservice xe-7/0/2 up down xe-7/0/3 up down pfe-7/1/0 up up pfe-7/1/0.16383 up up inet inet6 xe-7/1/0 up down xe-7/1/1 up down xe-7/1/2 up down xe-7/1/2.0 up down inet 10.20.3.1/24 multiservice xe-7/1/3 up up xe-7/1/3.0 up up inet 10.20.4.1/24 ... - If any of the interfaces are not up, see the T1600 Core Router Hardware Guide.