Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Display SCG Error Messages in the System Log File


    To determine the details of the SCG error messages in the system log file.


    To display the SCG error messages in the system log file, use the following CLI command:

    user@host> show log messages

    Sample Output

    t320@host>  show log messages | match scg
    Jan 28 14:53:10  utah chassisd[2384]: CHASSISD_FRU_OFFLINE_NOTICE: Taking SCG 0 offline - Offlined by cli command
    Jan 28 14:53:10  utah craftd[2386]:  Minor alarm set, SCG 0 Not Online
    Jan 28 14:53:10  utah alarmd[2385]: Alarm set: SCG color=YELLOW, class=CHASSIS, reason=SCG 0 Not Online


    The messages system log file records the time the failure or event occurred, the severity level, a code, and a message description. You can also use the show log messages | match scgs command to see error messages that are generated when an SCG fails or is offline. Use this information to diagnose a problem and to let the Juniper Networks Technical Assistance Center (JTAC) know what error messages were generated and the router events that occurred before and after the problem. For more information about system log messages, see the Junos OS System Log Messages Reference.

    Published: 2012-08-20