Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    Obtain SCB Hardware Information

    To obtain SCB hardware information:

    1. Display the SCB Hardware Information
    2. Locate the SCB Serial Number ID Label
    3. Display the SCB Firmware Version

    Display the SCB Hardware Information

    Purpose

    To obtain the SCB hardware information.

    Action

    To display the SCB hardware information, use the following command:

    user@host> show chassis hardware

    Sample Output

    user@host> show chassis hardware
    Hardware inventory:
    Item             Version  Part number  Serial number     Description
    Chassis                                00291             M40
    Backplane        REV 10   710-000073   AA2220
    Power Supply A   Rev A1   740-000234   000134            AC
    Maxicab          REV 07   710-000229   AA6957
    Minicab          REV 03   710-000482   AA3324
    Display          REV 07   710-000150   AA7798
    Routing Engine                                           RE-1.0
    SCB              REV 11   710-000075   AA7244            Internet Processor I
    [...Output truncated...]
    

    Meaning

    The command output displays the SCB version level, part number, serial number, and description.

    Locate the SCB Serial Number ID Label

    Purpose

    To locate the serial number ID on the SCB.

    Action

    To locate the SCB serial number ID label, look on the SCB board toward the front panel. See Figure 1.

    Figure 1: SCB Serial Number ID Label

    SCB Serial Number ID Label

    Display the SCB Firmware Version

    Purpose

    To display the firmware version running on the SCB.

    Action

    To display the version of firmware running on the SCB, use the following CLI command:

    user@host> show chassis firmware

    Sample Output

    user@host> show chassis firmware
    Part                     Type       Version
    [...Output truncated...]
    SCB 0                    ROM        Juniper ROM Monitor Version 3.0b1 
                             O/S        Version 5.5-20020613-cqPqI7 by builder on 2
    

    Meaning

    The command output displays the type and version level of the firmware running on the SCB.

     
     

    Published: 2012-08-20