Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Check the M40e and M160 Router Routing Engine LEDs

    Purpose

    Check the host module LEDs on the upper right of the craft interface. Three LEDs—one green MASTER, one green ONLINE, and one red OFFLINE—indicate the status of each host module. The LEDs marked HOST0 show the status of the Routing Engine in slot RE0 and the MCS in slot MCS0. The LEDs marked HOST1 show the status of the Routing Engine in slot RE1 and the MCS in slot MCS1.

    Action

    Figure 1 shows the host module LEDs on the M40e and M160 router craft interface.

    Figure 1: M40e and M160 Router Redundant Host Module LEDs

    M40e and M160
Router Redundant Host Module LEDs

    Table 1 describes the host module LEDs.

    Table 1: M40e and M160 Router Host Module LEDs

    Label

    Color

    State

    Description

    MASTER

    Green

    On steadily

    Host module (Routing Engine and MCS) is functioning as master.

    ONLINE

    Green

    On steadily

    Host module is present and operational.

    Blinking

    Host module is starting up.

    OFFLINE

    Red

    On steadily

    Host module is not present, or is present but not operational.

    Published: 2012-08-20