Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Check the M320 Router Routing Engine LEDs

    Purpose

    Each host subsystem has three LEDs, located in the middle of the craft interface, that indicate status. The LEDs labeled RE0 show the status of the Routing Engine in slot RE0 and the Control Board in slot CB0. The LEDs labeled RE1 show the status of the Routing Engine in slot RE1 and the Control Board in slot CB1.

    Action

    Figure 1 shows the host module LEDs on the M320 router craft interface.

    Figure 1: M320 Router Redundant Host Module LEDs

    M320 Router
Redundant Host Module LEDs

    Table 1 describes the functions of the host subsystem LEDs.

    Table 1: M320 Router Host Subsystem LEDs

    Label

    Color

    State

    Description

    FAIL

    Red

    On steadily

    Host module is offline.

    OK

    Green

    On steadily

    Host module is online and functioning normally.

    MASTER

    Green

    On steadily

    Host module is functioning as master.

     

    Related Documentation

     

    Published: 2012-08-20