Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Check the Detailed Routing Engine Status

    Purpose

    To check the routing engine status to ensure that it functions normally.

    Action

    To display a detailed status of the Routing Engine, use the following operational mode command:

    user@host> show chassis routing-engine
    user@host> show chassis routing-engine
    Routing Engine status 
     Slot 0  
      Current state: Master 
      Election priority: Master 
     Temperature          41 C / 105 degrees F
      DRAM               765 Mbytes
      CPU utilization 
        User              0 percent
        Background          0 percent
        Kernel             0 percent
        Interrupt          0 percent
        Idle            100 percent
      Serial ID            39000004f8bdec01
      Start time            2000-01-04 22:02:58 UTC
      Uptime               14 hours, 45 minutes, 40 seconds
      Load averages           1 minute   5 minute  15 minute
                                         0.05    0.04    0.01
     Slot 1 
      Current state  Backup 
      Election priority  Backup (default) 
      Temperature          41 C / 105 degrees F
      DRAM              765 Mbytes
      CPU utilization 
        User              0 percent
        Background          0 percent
        Kernel              0 percent
        Interrupt           2 percent
        Idle             98 percent
      Serial ID                        f2000004f903a801
      Start time               2000-01-04 01:28:02 UTC
      Uptime                 20 hours, 38 minutes, 1 seconds
    

    Meaning

    The command output displays the Routing Engine slot number, current state (Master, Backup, or Disabled), election priority (Master or Backup), and the airflow temperature. The command output also displays the total DRAM available to the Routing Engine processor, the CPU utilization percentage, and the Routing Engine serial number for the slot. The command output displays when the Routing Engine started running, how long the Routing Engine has been running, and the time, uptime, and load averages for the last 1, 5, and 15 minutes.

    Check the Uptime to ensure that the Routing Engine has not rebooted since it started running.

    (For M7i, M10i, M40e, M120, M160, M320, T320, and T640 routers) To check the status and temperature of the Routing Engines, use the following command:

    user@host> show chassis environment routing-engine
    user@host> show chassis environment routing-engine
    Route engine 0 status:
      State:                      Present Master
      Temperature:              0 degrees C / 32 degrees F
    Route engine 1 status:
      State:                      Present
    

    The command output displays the Routing Engine slot number, operating state, temperature, and whether it is operating as the master or backup. The state can be Present or Absent.

    To check the status and temperature of a particular Routing Engine, use the following command:

    user@host> show chassis environment routing-engine slot
     

    Related Documentation

     

    Published: 2012-08-20