Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Getting MCS Hardware Information
To get MCS hardware information:
Display the MCS Hardware Information
Purpose
To display the MCS hardware information.
Action
To display the MCS hardware information, use the following command:
user@host> show
chassis hardware
Sample Output
user@host> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis M40e [...Output truncated...] Routing Engine 0 d8000007c8460a01 RE-2.0 MCS 0 REV 11 710-001226 AS4709 [...Output truncated...]
Meaning
The command output displays the MCS slot number, revision level, part number, and serial number. Give this information to the Juniper Networks Technical Assistance Center (JTAC) if the MCS fails.
Locate the MCS Serial Number ID Label
Purpose
To locate the serial number ID on the MCS.
Action
To locate the MCS serial number ID label, look on the bottom left side of the board, as shown in Figure 1.
Figure 1: MCS Serial Number ID Label
