Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Monitor the FIC Status

    If the FIC fails, no information about chassis components is available through the CLI.

    To monitor the FIC status:

    1. Display FIC Status at the Command Line
    2. Check FIC LEDs

    Display FIC Status at the Command Line

    Purpose

    To display the FIC status at the command line.

    Action

    To display the FIC status, use the following command:

    user@host> show chassis pic pic-slot 3 fpc-slot 1

    Sample Output

    user@host> show chassis pic pic-slot 3 fpc-slot 1
    PIC fpc slot 1 pic slot 3 information:
      Type                             1x G/E, 1000 BASE
      ASIC type                        QGE FPGA
      State                            Online    
      PIC version                  1.4
      Uptime                        12 hours, 11 minutes, 39 seconds
    PIC Port Information:
      Port        Cable             SFP                SFP Vendor
      Number      Type              Vendor Name        Part Number
      0           UNKNOWN CABLE 
    

    Meaning

    Since the FIC is located in FPC 1 slot 3, you must specify its location with the show chassis pic command. The command output displays the FIC information, such as the FIC type, ASIC type, operating status, PIC version, and the amount of time the FIC has been online. The command output also displays port cable information.

    Check FIC LEDs

    Purpose

    To monitor the FIC status by checking the FIC LEDs.

    Action

    Table 1describes the FIC interface LEDs located on the FIC faceplate.

    Table 1: FIC Interface LEDs

    Label

    Color

    State

    Description

    LINK

    Green

    On steadily

    The port is online.

    ACTIVITY

    Green

    Blinking

    The port is receiving data.

    Off

    The port might be on, but is not receiving data.

     

    Related Documentation

     

    Published: 2012-08-20