Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     
     

    Check the FEB Uptime

    Purpose

    To check the FEB uptime. A short uptime can indicate an FEB failure.

    Action

    To check the FEB uptime, use the following command:

    user@host> show chassis feb

    Sample Output

    user@host> show chassis feb
    FEB status:
      Temperature                 24 degrees C / 75 degrees F
      CPU utilization              1 percent
      Interrupt utilization        0 percent
      Heap utilization            17 percent
      Buffer utilization          44 percent
      Total CPU DRAM              64 MB
      Internet Processor II          Version 1, Foundry IBM, Part number 9
      Start time:                    2002-07-12 17:30:43 PDT
      Uptime:                        0 days, 0 hours, 1 minutes, 0 seconds
    

    Meaning

    The command output displays how long the FEB has been operating. A short uptime can indicate an FEB failure. Look for error messages that were generated at least 5 minutes prior to the failure event by using the following command:

    user@host> show log messages
     
     

    Published: 2012-08-20