Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Check the Redundant Control Board Status from the Craft Interface


    To obtain the status of the redundant Control Board.


    If you are near the router, physically look at the craft interface for the Control Board LEDs. To display redundant Control Board status from the craft interface, use the following command:

    user@host> show chassis craft-interface

    Sample Output

    t640@host> show chassis craft-interface
    FPM Display contents:
    [...Output truncated...}
    CB LEDs:
       CB   0   1
    Amber  .
    Green  *
    Blue   *
    [...Output truncated...]


    The CB LEDs section of the command output indicates the status of the redundant Control Board. An asterisk (*) indicates the current operating state: Amber (offline), Green (online), and Blue (Master). In the above output, no redundant Control Board is installed—the output under CB1 is blank.

    Published: 2012-08-20