Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Checklist for Monitoring the CIP

    Purpose

    To monitor the Connector Interface Panel (CIP) to ensure management connection to the M40e, M160, M320, T320, and T640 router Routing Engines, Building Integrated Timing Source (BITS) interfaces for the Miscellaneous Control Subsystem (MCS), and alarm relay contacts. (See Table 1.)

    Action

    Table 1: Checklist for Monitoring the CIP

    Tasks for Monitoring the CIP

    Command or Action

    Monitor the CIP Status

    show chassis environment

    Check for CIP Alarms

    1. Display Current CIP Alarms

    show chassis alarms

    1. Display CIP Error Messages in the System Log File

    show log messages

    1. Display CIP Error Messages in the Chassis Daemon Log File

    show log chassisd

    Verify CIP Failure

    1. Check the CIP Connection

    Check the connector screws on the CIP faceplate.

    1. Check the Ethernet Port Functionality
    1. Connect to the Ethernet port.
    2. Check the LINK LED.
    3. Run the Junos OS CLI.
    1. Perform a CIP Swap Test
    1. Power down the router.
    2. Remove the CIP.
    3. Replace the CIP with one that you know works.
    4. Power on the router.

    Get CIP Hardware Information

    1. Display CIP Hardware Information

    show chassis hardware

    1. Locating the CIP Serial Number ID Label

    Look on the top of the left side of the CIP.

    Replace the CIP

    Power down the router. To replace and return a CIP, follow the instructions in the M40e or M160 router hardware guide.

     

    Related Documentation

     

    Published: 2012-08-20