Check for CIP Alarms
To check for CIP alarms:
- Display Current CIP Alarms
- Display CIP Error Messages in the System Log File
- Display CIP Error Messages in the Chassis Daemon Log File
Display Current CIP Alarms
Purpose
To view the current CIP alarms in the command line.
Action
To display the current CIP alarms, use the following command:
Sample Output
user@host> show chassis alarms 2 alarms currently active Alarm time Class Description 2002-06-11 20:45:08 UTC Major Connector Interface Panel Missing 2002-06-11 20:45:07 UTC Major fxp0: ethernet link down
Meaning
The command output displays the alarm date, time, severity level, and description. fxp0 is the Ethernet connection to a management LAN.
Display CIP Error Messages in the System Log File
Purpose
To determine the details of the CIP error messages in the system log file.
Action
To display the CIP error messages in the system log file, use the following CLI command:
Sample Output
user@host> show log messages
Jun 11 20:45:07 hissy-re0 /kernel: fxp0: link media DOWN 10Mb / half-duplex Jun 11 20:45:07 hissy-re0 craftd[556]: Major alarm set, fxp0: ethernet link down Jun 11 20:45:07 hissy-re0 alarmd[555]: Alarm set: fxp0 color=RED, class=ETHER, reason=fxp0: ethernet link down Jun 11 20:45:07 hissy-re0 mib2d[560]: SNMP_TRAP_LINK_DOWN: ifIndex 1, ifAdminStatus up(1), ifOperStatus down(2), ifName fxp0 Jun 11 20:45:08 hissy-re0 craftd[556]: Major alarm set, Connector Interface Panel Missing Jun 11 20:45:08 hissy-re0 alarmd[555]: Alarm set: CIP color=RED, class=CHASSIS, reason=Connector Interface Panel Missing
Meaning
The messages system log file records the time the failure or event occurred, the severity level, a code, and a message description. You can also use the show log messages | match cip command to see specific error messages that are generated when a CIP fails or is offline. Use this information to diagnose a power supply problem and to let the Juniper Networks Technical Assistance Center (JTAC) know what error messages were generated and the router events that occurred before and after the problem. For more information about system log messages, see the Junos OS System Log Messages Reference.
Display CIP Error Messages in the Chassis Daemon Log File
Purpose
To determine the details of the CIP error messages in the chassis daemon log file.
Action
To display CIP error messages in the chassis daemon (chassisd) log file, use the following command:
Sample Output
user@host> show log chassisd
Jun 11 20:45:08 *** inventory change *** Jun 11 20:45:08 CIP set alarm 0x1 Jun 11 20:45:08 alarm op fru 34 op 1 reason 1 Jun 11 20:45:08 send: red alarm set, class 100 obj 112 reason 1 Jun 11 20:45:08 CIP removed
Meaning
The chassisd database provides the date, time, and a component status message. The chassisd database is dynamic. It is initialized at router startup and is updated when components are added or removed.
