Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Troubleshooting the T640 SIBs

 

Problem:

Description:

The following alarms and LEDs indicate a problem with a SIB:

  • The yellow FAIL LED on the SIB faceplate is lit.

  • The green OK LED on the SIB faceplate is not lit.

  • A red alarm indicates that the SIB failed or has been removed.

  • A yellow alarm indicates that a spare SIB has failed or has been removed.

In Table 1, the text in the column labeled ”LCD Message” appears in the display of the craft interface. The text in the column labeled “CLI Message” appears in the output from the show chassis alarms command.

Table 1: SIB Alarm Messages

Alarm Type

LCD Message

CLI Message

Red

SIB sib-number Failure

SIB sib-number Fault

SIB sib-number Removed

SIB sib-number Absent

Yellow

Spare SIB Failure

Spare SIB Fault

Spare SIB Removed

Spare SIB Absent

Check SIB

Check SIB

Solution

To troubleshoot the T640 SIBs:

  1. Check the LEDs on the faceplate of each SIB.
  2. Check the LEDs on the craft interface.
  3. Use the CLI to check for alarms.
    • Standalone T640 router—Issue the show chassis alarms command to view the alarms.

    • T640 router in a routing matrix—Issue the show chassis alarms lcc lcc-number command to view the alarms.