Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Troubleshooting the TX Matrix Plus Host Subsystem

 

Problem:

Description:

The following indicate a problem with the host subsystem:

  • The OK LED on the TXP-CB is off.

  • The FAIL LED on the TXP-CB is lit green when the host subsystem detects a fault.

  • An alarm indicates that a host subsystem has been removed or failed.

Solution

The text in the column labeled ”LCD Message” appears in the display of the craft interface. The text in the column labeled “CLI Message” appears in the output from the show chassis alarms command.

Table 1: TX Matrix Plus Chassis Host Subsystem Alarm Messages

Component

Alarm Type

LCD Message

CLI Message

Host subsystems

Red

Host host-number Removed

Host host-number Removed

Yellow

Host host-number Failure

Host host-number Failure

See Troubleshooting the TX Matrix Plus Routing Engines and Troubleshooting the TX Matrix Plus TXP-CBs.