Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Restart the SFM

    To restart an SFM, use the following command:

    user@host> request chassis sfm slot slot-number restart
    user@host> request chassis sfm slot 0 restart
    Restart initiated, use "show chassis sfm" to verify
    user@host> show chassis sfm
    Temp  CPU Utilization (%)   Memory    Utilization (%)
    Slot State            (C)  Total  Interrupt      DRAM (MB) Heap     Buffer
      0  Ready              0      0          0         0         0          0
      1  Online            38      1          0        64         8         46
      2  Offline         --- Unresponsive ---
      3  Online            39      1          0        64         8         46
    

    The command output shows that the SFM restart has been initiated. On the M160 router, the command output indicates to use the show chassis sfm command to verify that the SFM has been restarted. The SFM status information shows that the SFM is ready and that the status values are 0 for approximately 5 seconds until the SFM is active.

     

    Related Documentation

     

    Published: 2012-08-20