[an error occurred while processing this directive] [an error occurred while processing this directive]

Verifying Autoinstallation Status on the SRX650 Services Gateway

To display and verify the autoinstallation status on the SRX650 services gateway, enter the following CLI commands shown in Table 1.

Table 1: Verifying Autoinstallation Status on the SRX650 Services Gateway

Action

Output

Meaning

From the CLI, enter the show system autoinstallation status command.


user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.25.100.1
Interface:
  Name: ge-0/0/0
  State: Configuration Acquisition
  Acquired:
    Address: 192.168.124.75
    Hostname: host-ge-000
    Hostname source: DNS
    Configuration filename: router-ge-000.conf
    Configuration filename server: 10.25.100.3
  Address acquisition:
    Protocol: DHCP Client
    Acquired address: None
    Protocol: RARP Client
    Acquired address: None
Interface:
  Name: ge-0/0/1
  State: None
  Address acquisition:
    Protocol: DHCP Client
    Acquired address: None
    Protocol: RARP Client
    Acquired address: None

The output shows the settings configured for autoinstallation. Verify that the values displayed are correct for the services gateway when it is deployed on the network.


Updated: 2009-04-23

[an error occurred while processing this directive]