Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Powering Off the SRX550 High Memory Services Gateway

    To power off the services gateway, press the Power button on the front of the services gateway and hold it for 10 seconds. The services gateway immediately shuts down.

    Note: Graceful shutdown is not supported on the SRX550 High Memory Services Gateway.

    To remove power completely from the services gateway, unplug the AC power cord or DC power supply cable.

    After powering off a power supply, wait at least 60 seconds before turning it back on. After powering on a power supply, wait at least 10 seconds before turning it off.

    When the system is completely powered off and you turn on the power supply, the services gateway starts as the power supply completes its startup sequence. If the services gateway finishes starting and you need to power off the system again, first issue the request system halt CLI command.

    After a power supply is turned on, it can take up to 60 seconds for status indicators—such as the POWER LED (on the front panel of the chassis) and the show chassis command display—to indicate that the power supply is functioning normally. Ignore error indicators that appear during the first 60 seconds.

    Note: When you power off a SRX550M Services Gateway with a LTE Mini-PIM installed, the LEDs on the LTE Mini-PIM may still be lit. This is because the Power button does not shut off power to the power supplies or the midplane on a SRX550M Services Gateway. You must remove the power cables or power cords to completely shut down the services gateway.

    Modified: 2017-08-22