Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Powering On the SRX3400 Services Gateway

 

To power on the services gateway:

  • Ensure that you have connected the AC power cord or DC power cables to the device.
  • Insert the plug into an AC power source receptacle (for AC-powered devices).

    Or

    Attach the power cable to the DC power source (for DC-powered devices).

  • Press the Power button on the front of the Switch Fabric Board (SFB) for three to five seconds.

The device starts automatically as the power supply completes its startup sequence. The Power LED blinks during startup and remains on steadily when the device is operating normally.

Note
  • If power is lost to the services gateway, the Power-On/Power-Off state is retained. For example, if the services gateway loses power while the device is on, when power returns, the device will still be in the On state.

    The power state of the services gateway must be considered when turning on the power again:

    • If the power state of the services gateway is ON, the cable must be plugged in to turn on the services gateway.

    • If the power state of the services gateway is OFF, the POWER button must be pressed and held to turn on the services gateway.