Technical Documentation

Locating an SRX240 Services Gateway Component Serial Number and Agency Labels

Before contacting Juniper Networks to request an RMA, you must find the serial number and agency label on the SRX240 Services Gateway or component.

Listing the SRX240 Services Gateway and Component Details with the CLI

To list all of the SRX240 Services Gateway components and their serial numbers, enter the following command-line interface (CLI) command:


user@host> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis 015810200500 J6350
Midplane REV 00 710-012339
System IO REV 00 710-012315 JX350 System IO
Routing Engine REV 00 710-012151 RE-J6350-3400
HW crypto Crypto accelerator
FPC 0 FPC
PIC 0 4x GE Base
PIC

Note: In the show chassis hardware command, the Mini-Physical Interface Module (Mini-PIM) slot number is reported as an FPC number, and the Mini-PIM number (always 0) is reported as the PIC number.

Most components also have a serial number ID label attached to the component body.

Chassis Serial Number and Agency Labels

The SRX240 Services Gateway has a serial number ID label located on the back of the chassis and an agency label on the bottom of the chassis as shown in Figure 1.

Figure 1: Location of SRX240 Serial Number and Agency Labels

Image g037514.gif

Mini-Physical Interface Module Serial Number Label

Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable on the SRX240 Services Gateway. Each Mini-PIM has a unique serial number. The serial number label is located on the right side of the Mini-PIM, when the Mini-PIM is horizontally oriented (as it would be installed on the device).

The exact location might be slightly different on different Mini-PIMs, depending on the placement of components on the Mini-PIM.


Published: 2010-04-27