Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Verifying Parts Received with the SRX1400 Services Gateway

 

A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order. Note that feature and service cards are shipped in separate boxes from the chassis.

If any part is missing, contact a customer service representative.

A fully configured services gateway contains the chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your services gateway can vary depending on the configuration you ordered.

Table 1: Parts List for a Fully Configured SRX1400 Services Gateway

Component

Quantity

Chassis, including backplane, and rack-mounting brackets

1

NSPC

1

Routing Engine

1

System I/O card

1

Power supplies

At least 1 and up to 2

Fan tray

1

Air filter

1

SRX1400 Services Gateway Getting Started Guide

1

Blank panels for slots without components installed

  • 1 single-wide blank panel for CFM slot 2.

  • 1 double-wide blank panel for adjacent CFM slots 1 and 3.

AC Power Cord

1

Note

The NSPC is not a part of the base chassis configuration. You must order it separately. Contact your Juniper Networks customer service representative for more information.

Note

If you are planning to use an Network Processing Card (NPC) and a Services Processing Card (SPC) (supported on SRX3000 Series Services Gateway) on the SRX1400 device, then you must order them separately.

You can use an NPC and an SPC on the SRX1400 device in place of the NSPC.

To install the NPC and SPC on the SRX1400 Services Gateway, you must order the double-wide tray (SRX1K3K-2CFM-TRAY) to hold two single-wide CFMs (NPC and SPC) separately. Contact your Juniper Networks customer service representative for more information.

Table 2: Accessory Box Parts List

Part

Quantity

Rack mount kit

1

RJ-45-to-DB-9 cable to connect the services gateway through the serial port

1

Juniper Networks Product Warranty

1

End User License Agreement

1

SRX1400 Services Gateway Getting Started Guide

1

Documentation Information Card

1

Product Registration

1

Juniper Compliance Form Letter; Reduction of Hazardous Substances (RoHS)

1

Document sleeve

1

ESD wrist strap with cable

1