Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Troubleshooting with Chassis and Interface Alarm Messages on the SRX1400 Services Gateway

    When the Routing Engine detects an alarm condition, it lights the red or yellow alarm LED on the SYSIOC as appropriate. To view a more detailed description of the alarm cause, use the show chassis alarms CLI command:

    user@host> show chassis alarms
    No alarms currently active

    There are two classes of alarm messages:

    • Chassis alarms—Indicate a problem with a chassis component such as the cooling system or power supplies.
    • Interface alarms—Indicate a problem with a specific network interface.

    Published: 2013-06-21