Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Powering On the SRX110 Services Gateway

 

To power on the services gateway:

  1. Ensure that you have connected the power supply to the device.
  2. Insert the plug of the power supply adapter into an AC power source receptacle.
  3. Turn on the power to the services gateway.

The device starts automatically as the power supply completes its startup sequence. The Power LED lights up during startup and remains on when the device is operating normally.

Note

After the power supply is turned on, it can take up to 60 seconds for status indicators—such as the Status and Power LEDs—to show that the power supply is functioning normally.

Note

We recommend you issue the CLI command request system power-off when you want to power off the device immediately after powering it on.