Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Powering Off the SRX110 Services Gateway

 

You can power off the services gateway in one of two ways:

  • Graceful shutdown — Press and release the Power button. The device begins gracefully shutting down the operating system and then powers itself off.

  • Forced shutdown — Press the Power button and hold it for more than 10 seconds. The device immediately powers itself off without shutting down the operating system.

Note

Do not press the Power button while the device is shutting down.

Caution

Use the graceful shutdown method to halt, power off, or reboot the services gateway. Use the forced shutdown method as a last resort to recover the services gateway if the services gateway operating system is not responding to the graceful shutdown method.

Caution

Forced shutdown can result in data loss and corruption of the file system.

Note

To remove power completely from the device, unplug the AC power cord or switch off the power source.

After powering off a power supply, wait at least 10 seconds before turning it back on. After powering on a power supply, wait at least 10 seconds before turning it off.

The Power button on the services gateway is a standby power switch.

If you press the Power button to power off the device when it is still connected to a power source, 12-V power will still be available in the chassis and the device will be fully powered off.

Note

When you are powering off the device, the system displays the following message: Turning the system power off. You can now safely remove the power cable to completely disconnect the power from the device.

Note

You can use the request system reboot command to schedule a reboot of the services gateway.

For more information about halting, powering off, or rebooting the services gateway using the CLI, see the following topics: