Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Monitoring the SRX100 Services Gateway Chassis Using the CLI

 

You can monitor alarms to troubleshoot hardware problems on a services gateway. The chassis properties include the status of active chassis alarms on the device and the environmental measurements of the device.

To view these chassis properties, select Monitor>Chassis in the J-Web interface, or enter the following CLI show commands:

  • show chassis hardware

  • show chassis environment

  • show chassis fpc

  • show chassis alarms

  • show chassis hardware detail





Examples:

The following examples provide the sample output of commands:

  • show chassis hardware

    user@host > show chassis hardware

  • show chassis hardware detail

    user@host > show chassis hardware detail

    Note

    The values given in the usb0 rows provide information for USB-level debugging. This information is about USB hub topology.

  • show chassis environment

    user@host > show chassis environment

  • show chassis fpc

    user@host > show chassis fpc

  • show chassis alarms

    user@host > show chassis alarms