Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Connecting the SRX3600 Services Gateway to a Network for Out-of-Band Management


To connect the Routing Engine to a network for out-of-band management:

  1. Plug one end of an Ethernet cable with RJ-45 connectors (Figure 1 shows the connector) into the RE ETHERNET 0 port on the front of the SFB.
    Figure 1: SFB Ethernet Cable Connector
    SFB Ethernet Cable

    One Ethernet cable is provided with the services gateway.

  2. Plug the other end of the cable into the network device.