Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Connecting the SRX3400 Services Gateway to a Management Console or an Auxiliary Device

 

To use a system console to configure and manage the Routing Engine, connect it to one of the RE CONSOLE ports on the SFB using the RJ-45 cable.

To connect a management console or an auxiliary device:

  1. Plug the RJ-45 end of the cable (Figure 2 shows the connector) into the RE CONSOLE 0 port on the SFB.
  2. Plug the socket DB-9 end into the device's serial port.
    Figure 1: Connecting to the Console Port
    Connecting to the Console Port
    Figure 2: Console and Auxiliary Cable Connector
    Console and
Auxiliary Cable Connector
    Note

    For console devices, configure the serial port to the following values:

    • Baud rate—9600

    • Parity—N

    • Data bits—8

    • Stop bits—1

    • Flow control—none