Maintaining the Routing Engine on the SRX3600 Services Gateway
The host subsystem comprises a Routing Engine installed directly into the midplane. To maintain the host subsystem components, follow these guidelines:
Check the LEDs on the SFB faceplate.
Check the LEDs on the Routing Engine faceplate.
To check the status of the Routing Engine, issue the
show chassis routing-enginecommand. The output is similar to the following:user@host> show chassis routing-engineRouting Engine status: Slot 0: Current state Master Election priority Master (default) DRAM 1023 MB Memory utilization 34 percent CPU utilization: User 0 percent Background 0 percent Kernel 3 percent Interrupt 0 percent Idle 96 percent Model RE-PPC-1200-A Start time 2010-04-05 14:01:33 PDT Uptime 47 minutes, 48 seconds Last reboot reason Router rebooted after a normal shutdown. Load averages: 1 minute 5 minute 15 minute 0.04 0.04 0.05To check the status of the SFB, issue the
show chassis environment cbcommand. The output is similar to the following:user@host> show chassis environment cbCB 0 status: State Online Master Temperature 37 degrees C / 98 degrees F Power 1 1.0 V 982 mV 1.1 V 1057 mV 1.2 V 1169 mV 1.25 V 1214 mV 1.5 V 1450 mV 1.8 V 1753 mV 2.5 V 2449 mV 3.3 V 3248 mV 3.3 V bias 3296 mV 5.0 V 4975 mV 12.0 V 11640 mV Bus Revision 108 FPGA Revision 0
For more information about using the CLI, see the CLI Explorer.