Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Connecting the SRX240 Services Gateway to the AC Power Source

 

Figure 1 shows how the SRX240 Services Gateway is connected to an AC power source.

Figure 1: SRX240 Services Gateway Power Supply Connection
 SRX240 Services Gateway Power
Supply Connection

To connect the device to the power supply:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the other end of the ESD strap to the ESD point on the rack.
  2. Insert the appliance coupler end of a power cord into the appliance inlet on the power supply faceplate.
  3. Insert the plug into an AC power source receptacle.
Note

The services gateway must be connected to earth ground during normal operation. The protective earthing terminal on the rear of the chassis is provided to connect the services gateway to ground.

Caution

We recommend using a surge protector for the power connection.

Note

Use the cable tie holder to secure the power cord on to the power supply point.

Note

We strongly recommend that you use only the 3-prong power cord supplied with your services gateway. If you are using a 2-prong power cord, then ensure that your services gateway is adequately grounded using the grounding point available on the back panel of the chassis.