Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Troubleshooting the Network and Services Processing Card on the SRX1400 Services Gateway

 

To troubleshoot the Network and Services Processing Card (NSPC), follow these guidelines:

  • Make sure the NSPC is properly seated in the slot and its screws are tightened.

  • Use the CLI show chassis fpc 1 command to check the status of installed NSPC. As shown in the sample output for show chassis fpc 1, the value Online in the column labeled State indicates that the NSPC is functioning normally:

    user@host> show chassis fpc 1
    Note

    Because the NSPC occupies slot 1 and slot 3 of the SRX1400 Services Gateway chassis, you can use the show chassis fpc 1 and show chassis fpc 3 commands to check the status of NSPC.

  • Use the CLI show chassis fpc 1 detail command for more detailed output.

    user@host> show chassis fpc 1 detail

For further descriptions of the output from the commands, see the Junos System Basics and Services Command Reference.