Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Monitoring the AX411 Access Point with the LEDs

 

At regular intervals, check the AX411 Access Point LEDs to make sure that the access point is functional and has not encountered an error condition.

Under normal operating circumstances, the access point LEDs will be in the condition shown in Table 1.

Table 1: Access Point LED Normal Indications

LED

Color

State

Description

Power

Green

On steadily

The access point is powered on and operating normally.

Status

Green

On steadily

The access point is being managed by the SRX Series Services Gateway.

Radio 1 (5 GHz radio)

Blue

Flashing

The 5 GHz radio is enabled and broadcasting. This LED will be off if the 5 GHz radio is disabled, for example, if the radio settings for the country code do not allow the use of 5 GHz channels.

Radio 2 (2.4 GHz radio)

Green

Flashing

The 2.4 GHz radio is enabled and broadcasting. This LED will be off if the 2.4GHz radio is disabled, for example, if the radio settings for the country code do not allow the use of 2.4 GHz channels.

Table 2 describes the LED indications that occur while the access point is starting up.

Table 2: Access Point LED Starting Indications

Power

Status

Radio1

Radio2

State

Red

Off

Blue

Blue

The access point has just started up.

Off

Off

Blue

Blue

The access point is loading Uboot.

Green

Off

Blue

Blue

The access has finished loading Uboot.

Green

Off

Off

Off

The access point has started and is requesting an IP address with DHCP, but is not yet being managed by SRX Series device and has not received its configuration from the SRX Series device.

Green

Green

Off

Off

The access point has received an IP address is being managed by the SRX Series device and has received its configuration from the SRX Series device.